You can list nPartition configurations by using any one
of the following procedures:
nPartition configuration information includes a list of
which cells are assigned to which nPartitions, and additional details such
as the core cell choices, boot device paths, and nPartition names.
Procedure 8-26 Listing nPartition Configurations (Service Processor)
From the service processor Command Menu, use the CP command
to list the nPartition configurations for the server complex. The CP command
reports information including the nPartition numbers and corresponding cells
assignments.
Login to the
service processor (MP or GSP) and enter CM to access the
Command Menu.
At the Command
Menu, enter the CP command to list the nPartition configurations:
the nPartition numbers and corresponding cells assignments for the server
complex.
To exit the service
processor Command Menu, enter MA to return to the service
processor Main Menu.
At the Main Menu, enter X to
exit the service processor interface.
Procedure 8-27 Listing nPartition Configurations (nPartition Commands)
From the command line, issue the parstatus -P command
to list a summary of all nPartitions in the server complex. For detailed information
issue the parstatus -V -p# command
for more information about a specific nPartition (-p# where # is
the nPartition number).
Login to a system
with the nPartition commands installed.
If using
remote administration features to list nPartition configurations, you can
login to any system with Enhanced nPartition Commands installed.
Issue the parstatus
-P command to list a summary of all nPartitions in the server complex.
For detailed information issue the parstatus -V
-p# command for more information about a
specific nPartition (-p# where # is
the nPartition number).
Procedure 8-28 Listing nPartition Configurations (Partition Manager)
You can list nPartition configurations for a server complex
by using Partition Manager.
When using Partition Manager Version 1.0, view the left
side of the primary window to see a display of all nPartitions in the server,
and for details select an nPartition and select the Details
Show Complex Details action.
When using Partition Manager Version 2.0, use the nPartitions tab
to view details about all nPartitions in the complex.
Access Partition
Manager.
For details on accessing Partition Manager
or other tools, see “Tools for Listing Status”.
From Partition
Manager Version 1.0, view the left side of the primary window to see a display
of all nPartitions in the server. For further details about a specific nPartition,
select the nPartition and select the DetailsShow Complex Details action.
From Partition Manager Version 2.0, use the nPartitions tab
to view details about all nPartitions in the complex.
Exit Partition
Manager.
From Partition Manager Version 1.0, select
the FileExit action.
From Partition Manager Version 2.0, select Log
off parmgr or exit the Web browser when finished.
Printable version
