You can list product and serial numbers by using any one
of the following procedures:
Product and serial number information is stored in the
Stable Complex Configuration Data portion of the Complex Profile for a cell-based
server.
Procedure 8-22 Listing Product and Serial Numbers (Service Processor)
From the service processor Command Menu, use the ID command
to list product and serial number information for the server complex.
Login to the
service processor (MP or GSP) and enter CM to access the
Command Menu.
At the Command
Menu, enter the ID command to list product and serial number
information for the server complex.
In response to
the Do you want to modify any of this information? prompt,
type n (or type q) to not modify
the server complex information that was displayed.
To exit the service
processor Command Menu, enter MA to return to the service
processor Main Menu.
At the Main Menu, enter X to
exit the service processor interface.
Procedure 8-23 Listing Product and Serial Numbers (BCH Menu)
From the BCH Information Menu, use the CID command
to list the product number and serial number for the server complex. The BCH
Menu is available only on HP 9000 systems.
Access the BCH
Main Menu for any nPartition in the complex.
Login
to the service processor (MP or GSP) and enter CO to access
the Console list. Select the nPartition console. When accessing the console,
confirm that you are at the BCH Main Menu (the Main Menu:
Enter command or menu> prompt). If at a BCH menu other
than the Main Menu, then enter MA to return to the BCH
Main Menu.
Enter IN to
access the BCH Information Menu.
Enter the CID command
to list the product number and serial number for the server complex.
Exit the console
and service processor interfaces if finished using them.
To
exit the BCH environment type ^B (Control-B);
this exits the nPartition console and returns to the service processor Main
Menu. To exit the service processor, type X at the Main
Menu.
Procedure 8-24 Listing Product and Serial Numbers (nPartition Commands)
From the command line, issue the parstatus -X command
to display the product number and serial number for the server complex.
Login to a system
with the nPartition commands installed.
If using
remote administration features, you can login to any system with Enhanced
nPartition Commands installed.
Issue the parstatus
-X command to display the product number and serial number.
Procedure 8-25 Listing Product and Serial Numbers (Partition Manager)
You can list the product number and serial number for a
complex by using Partition Manager.
When using Partition Manager Version 1.0, select the Complex
Show Complex Details action and General tab.
When using Partition Manager Version 2.0, select the General tab.
Access Partition
Manager.
For details on accessing Partition Manager
or other tools, see “Tools for Listing Status”.
From Partition
Manager Version 1.0, select the ComplexShow
Complex Details action and General tab
to list the product number and serial number for the server complex.
From Partition Manager Version 2.0, select the General tab
to list the product number and serial number.
Exit Partition
Manager.
From Partition Manager Version 1.0, select
the FileExit action.
From Partition Manager Version 2.0, select Log
off parmgr or exit the Web browser when finished.
Printable version
