 |
» |
|
|
|
|  | |
You can list the cell configurations in a cell-based server
by using any one of the following procedures: Cell configuration details include the list of the cells
installed in the server, and cell assignments to nPartitions. Procedure 8-1 Listing Cell Configurations (Service Processor) From the service processor Command Menu, use the CP and PS commands
to list cell configuration details. Login to the
service processor (MP or GSP) and enter CM to access the
Command Menu. At the Command
Menu, enter the CP command to list cell nPartition assignments,
or use the PS command to list details about the individual
cells in the server complex. The PS command's C option
displays detailed information about a specified cell. To exit the service
processor Command Menu, enter MA to return to the service
processor Main Menu. At the Main Menu, enter X to
exit the service processor interface.
Procedure 8-2 Listing Cell Configurations (nPartition Commands) From the command line, use the parstatus -C command
to list cell configuration details. Login to a system
with the nPartition commands installed. If using
remote administration features to list cell configurations, you can login
to any system with Enhanced nPartition Commands installed. Issue the parstatus
-C command to list details about the cells installed in the server
complex and their nPartition assignments.
Procedure 8-3 Listing Cell Configurations (Partition Manager) From Partition Manager, select the Cells tab
to list cell configuration details. When using Partition Manager Version 1.0, first select
the Details Show Complex Details action, then select the Cells tab. Access Partition
Manager. For details on accessing Partition Manager
or other tools, see “Tools for Listing Status”. Use the Cells tab
to list cell configurations, including details about which cell are installed
in the server and any cell nPartition assignments. From
Partition Manager Version 1.0, select the DetailsShow Complex Details action, then
select the Cells tab. From Partition Manager Version 2.0, select the Cells tab
to list these details. Exit Partition
Manager. From Partition Manager Version 1.0, select
the FileExit action. From Partition Manager Version 2.0, select Log
off parmgr or exit the Web browser when finished.
|
Printable version
