|
|
General configuration parameters include VPN 3002 environment items: system identification, time, and date.
This section of the Manager lets you configure general VPN 3002 parameters.
This screen lets you configure system identification parameters that are stored in the standard MIB-II system object. Network management systems using SNMP can retrieve this object and identify the system. Configuring this information is optional.
Enter a system name that uniquely identifies this VPN 3002 on your network; for example, VPN01. Maximum 255 characters.
Enter the name of the contact person who is responsible for this VPN 3002. Maximum 255 characters.
Enter the location of this VPN 3002. Maximum 255 characters.
To apply your system identification settings and include them in the active configuration, click Apply. The Manager returns to the Configuration | System | General screen.
To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | General screen.
This screen lets you set the time and date on the VPN 3002. Setting the correct time is very important so that logging information is accurate.
The screen shows the current date and time on the VPN 3002 at the time the screen displays. You can refresh this by redisplaying the screen.
The values in the New Time fields are the time and date on the browser PC at the time the screen displays. Any entries you make apply to the VPN 3002, however.
In the appropriate fields, make any changes. The fields are, in order: Hour : Minute : Second Month / Day / Year Time Zone. Click the drop-down menu buttons to select Month, and Time Zone. The time zone selections are offsets in hours relative to GMT (Greenwich Mean Time), which is the basis for Internet time synchronization. Enter the Year as a four-digit number.
To enable DST support, check the box. During DST (Daylight-Saving Time), clocks are set one hour ahead of standard time. Enabling DST support means that the VPN 3002 automatically adjusts the time zone for DST or standard time. If your system is in a time zone that uses DST, you must enable DST support.
To apply your time and date settings, and to include your settings in the active configuration, click Apply. The Manager returns to the Configuration | System | General screen.
To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | General screen.
Posted: Wed Feb 4 10:50:32 PST 2004
All contents are Copyright © 1992--2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
