|
|
The Cisco VCO/4K Mechanical Assemblies describe the physical architecture and assemblies of a VCO/4K system, including system enclosures, subracks, power subsystems, storage subsystems, and other general system components.
Each technical description reflects the most current information available about the product. The information contained in a technical description is specific to a single component within a system. Other system documents point to technical descriptions as containing the most detailed information available for a component.
A technical description contains information to service and maintain the component. For system-level servicing, refer to the Cisco VCO/4K System Maintenance Manual. The maintenance manual assists in isolating the cause of a system malfunction and serves as a pathfinder to the more detailed information contained in technical descriptions.
 |
Note This document represents the most current information about VCO/4K mechanical
assemblies. If you need information pertaining to VCO/4K assemblies, circuit cards, or
other components that are not included in this document, see the following URL on Cisco's
web site for legacy VCO/4K information: http://www.cisco.com/univercd/cc/td/doc/product/tel_pswt/index.htm |
This manual is intended for VCO/4K system users and third-party support personnel. If you are unfamiliar with the VCO/4K system, refer to one or more of the related documents listed in the "Related Documentation" section.
This manual assumes that the host application (if it is a hosted system) is written to conform to the VCO API as described in the Cisco VCO/4K Standard Programming Reference or Cisco VCO/4K Extended Programming Reference. However, that does not preclude problems occurring between the application and the VCO/4K system.
Each release of the VCO/4K system software is described in the Cisco VCO/4K Release Notes that contain detailed information on changes from one release to the next. If your VCO/4K System includes the SS7 subsystem, refer to the Cisco VCO/4K SS7 Release Notes.
This document uses the following conventions:
|
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. |
 |
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
 |
Warning Means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translated versions of the warning, refer to the Regulatory Compliance and Safety document that accompanied the device. |
The Cisco VCO/4K Mechanical Assemblies is organized as follows:
The following documents are referenced from this guide or contain information that is directly related to system performance and configuration.
Knowledge of PSTN communication protocols is also important.
The following third-party documents are recommended by Cisco:
The following sections provide sources for obtaining documentation from Cisco Systems.
You can access the most current Cisco documentation on the World Wide Web at the following sites:
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Cisco documentation is available in the following ways:
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:
Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
To access Cisco.com, go to the following website:
The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website:
P3 and P4 level problems are defined as follows:
In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.
To register for Cisco.com, go to the following website:
http://www.cisco.com/register/
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website:
http://www.cisco.com/tac/caseopen
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
P1 and P2 level problems are defined as follows:
Posted: Sat Sep 28 09:50:12 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.