cc/td/doc/product/tel_pswt/vco_prod
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Indonesia 2 Tone Plan

Indonesia 2 Tone Plan

This chapter details the modifications to the Digital Tone Generator (DTG or DTG-2) and Service Platform Card (SPC)-CPA service circuits to support the supervision tones specific to the Indonesia telephone network.

The information in this chapter supersedes the information in the following manuals:

Tone Characteristics

Table 2-1 summarizes the characteristics of the most frequently used supervision tones in the Indonesia 2 network.


Table 2-1: Indonesia 2 Digital Tone Generator Supervision Tones
Tone Frequencies (Hz) Amplitude (dBm) Cadence Detected by CPA?

Dial

425

-9

Continuous

Yes

Ringback

425

-9

1 second on,
4 second off,
REPEATED

Yes1

Busy

425

-9

0.5 second on,
0.5 second off,
REPEATED

Yes

Fast Busy

425

-9

0.25 second on,
0.25 second off,
REPEATED

Yes

SIT

950

1400

1800

-9

-9

-9

330 milliseconds on,
30 milliseconds off,
330 milliseconds on,
30 milliseconds off,
330 milliseconds on,
1.03 seconds off

Yes

Number Unobtainable

425

-9

2 seconds on,
0.5 second off

Yes2

Trunk Offering

425

-9

0.5 second on,
0.5 second off,
0.5 second on,
1 second off

No

Payphone Recognition

1200

800

-9

-9

0.2 second on,
0.2 second off,
0.2 second on,
2 seconds off

No

Call Wait

425

-9

0.15 second on,
0.15 second off,
0.15 second on,
10 seconds off

No

Special Dial

425

-9

0.13 second on,
0.13 second off

No

Recognition

1000

0

5 seconds on,
5 seconds off

No

Howler

1400

+3

Continuous

No

1The Caller Wait tone, a tone requested for the Indonesia 2 country feature package, is identical to, and reported as, the Ringback tone.
2Number Unobtainable is detected by the CPA as SIT.

Tone Detection

Use the system administration answer supervision templates function to control tone detection for the tones listed in Table 2-1. Supervision template processing is described in the Cisco VCO/4K System Administrator's Guide.

Answer Supervision Template Screen Terminology

The supervision events and tones listed in the Answer Supervision Template screen use standard North American network terminology. Table 2-2 shows the Answer Supervision Template screen terms to use with the Indonesia 2 country feature package.


Table 2-2: Answer Supervision Template Screen Terminology for Indonesia 2
Answer Supervision Template
Event and Tone Names
Indonesia 2 Tone Names

Dial Tone

Dial

Ringback

Ringback

Busy

Busy

Reorder

Fast Busy

SIT Tones

SIT/Number Unobtainable

Ring Cess.1

Not Applicable

Voice Det.1

Not Applicable

Voice Cess.1

Not Applicable

Wink1

Not Applicable

Answer1

Not Applicable

Time1

Not Applicable

Hook Flash1

Not Applicable

Pager Cue

Not Available

ISUP Tone

Not Applicable

ISUP Cess.1

Not Applicable

1Not a tone.

Tone generation is performed through DTG outpulse and static tone channels. The allocation of these tones is controlled via inpulse rules, Voice Path Control ($66), and DTMF Collection Control ($67) commands.


Note   The Indonesia 2 country feature package's DTMF interdigit outpulse timing has been altered from the international standard to 100 milliseconds on, 100 milliseconds off.

Table 2-3 supersedes the tone generation table listed in the Cisco VCO/4K Standard Programming Reference and the Cisco VCO/4K Extended Programming Reference. It also supersedes the tone output level specifications found in the Cisco VCO/4K Card Technical Descriptions. For more information on generating tones, refer to the Cisco VCO/4K System Administrator's Guide.

The tones and their corresponding output levels, decimal values, hexadecimal values, and port addresses are summarized in Table 2-3.


Table 2-3: Tone Levels, Values, and Port Addresses
Tone Output Level Decimal Value Hex Value Port Addresses

Beep

0

00

None

Quiet (PCM idle pattern 01010100)

1

01

04C0

1 KHz

0 dBm

2

02

04C1

Dial

-9 dBm

3

03

04C2

380 Hz

-10 dBm

4

04

04C3

Beep (440Hz)

-13 dBm

5

05

04C4

Howler

+3 dBm

6

06

04C5

1400 Hz

-9 dBm

7

07

04C6

1000 Hz @max CODEC output

8

08

04C7

920 Hz Dial Tone

-13 dBm

9

09

04C8

404 Hz

0 dBm

10

0A

04C9

1004 Hz

0 dBm

11

0B

04CA

2804 Hz

0 dBm

12

0C

04CB

Reserved

13

0D

04CC

Reserved

14

0E

04CD

Reserved

15

0F

04CE

Reserved

16

10

04CF

Ringback

-9 dBm

17

11

04D0

Busy

-9 dBm

18

12

04D1

Fast Busy

-9 dBm

19

13

04D2

Reserved

20

14

04D3

SIT

-9 dBm

21

15

04D4

Number Unobtainable

-9 dBm

22

16

04D5

Trunk Offering

-9 dBm

23

17

04D6

Payphone Recognition

-9 dBm

24

18

04D7

Reserved

25

19

04D8

Reserved

26

1A

04D9

Special Dial

-9 dBm

27

1B

04DA

Call Wait

-9 dBm

28

1C

04DB

Recognition

0 dBm

29

1D

04DC

Reserved

30

1E

04DD

Reserved

31

1F

04DE

Reserved

32

20

04DF

DTMF digit 0 (steady)

-10/-9 dBm/freq

33

21

04E0

DTMF digit 1 (steady)

-10/-9 dBm/freq

34

22

04E1

DTMF digit 2 (steady)

-10/-9 dBm/freq

35

23

04E2

DTMF digit 3 (steady)

-10/-9 dBm/freq

36

24

04E3

DTMF digit 4 (steady)

-10/-9 dBm/freq

37

25

04E4

DTMF digit 5 (steady)

-10/-9 dBm/freq

38

26

04E5

DTMF digit 6 (steady)

-10/-9 dBm/freq

39

27

04E6

DTMF digit 7 (steady)

-10/-9 dBm/freq

40

28

04E7

DTMF digit 8 (steady)

-10/-9 dBm/freq

41

29

04E8

DTMF digit 9 (steady)

-10/-9 dBm/freq

42

2A

04E9

DTMF digit A (steady)

-10/-9 dBm/freq

43

2B

04EA

DTMF digit B (steady)

-10/-9 dBm/freq

44

2C

04EB

DTMF digit C (steady)

-10/-9 dBm/freq

45

2D

04EC

DTMF digit D (steady)

-10/-9 dBm/freq

46

2E

04ED

DTMF digit * (steady)

-10/-9 dBm/freq

47

2F

04EE

DTMF digit # (steady)

-10/-9 dBm/freq

48

30

04EF

MF digit 0 (steady)

-7 dBm/freq

49

31

04F0

MF digit 1 (steady)

-7 dBm/freq

50

32

04F1

MF digit 2 (steady)

-7 dBm/freq

51

33

04F2

MF digit 3 (steady)

-7 dBm/freq

52

34

04F3

MF digit 4 (steady)

-7 dBm/freq

53

35

04F4

MF digit 5 (steady)

-7 dBm/freq

54

36

04F5

MF digit 6 (steady)

-7 dBm/freq

55

37

04F6

MF digit 7 (steady)

-7 dBm/freq

56

38

04F7

MF digit 8 (steady)

-7 dBm/freq

57

39

04F8

MF digit 9 (steady)

-7 dBm/freq

58

3A

04F9

MF digit KP (steady)

-7 dBm/freq

59

3B

04FA

MF digit ST (steady)

-7 dBm/freq

60

3C

04FB

MF digit ST3P

-7 dBm/freq

61

3D

04FC

MF digit STP

-7 dBm/freq

62

3E

04FD

MF digit ST2P

-7 dBm/freq

63

3F

04FE


hometocprevnextglossaryfeedbacksearchhelp
Posted: Sat Sep 28 20:41:25 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.