|
This chapter details the modifications to the Digital Tone Generator (DTG or DTG-2), Call Progress Analyzer (CPA), and Service Platform (SPC) cards to support the following features:
The information in this chapter supersedes the information in the following manuals:
Table 3-1 summarizes the characteristics of the most frequently used supervision tones in the China network.
.
Tone | Frequencies (Hz) | Amplitude (dBm) | Cadence | Detected by CPA? |
---|---|---|---|---|
Dial | 450 | -10 | Continuous | Yes |
Ringback | 450 | -10 | 1 second on, | Yes |
Busy | 450 | -10 | 0.35 seconds on, | Yes |
Fast Busy | 450 | -10 | 0.7 seconds on, | Yes |
Number Unavailable | 450 | -10 | 0.1 seconds on, | No |
Toll | 450 | -20 | 0.2 seconds on, | No |
Queue Wait | 450 | N/A | 1 second on, | Yesas Ringback |
Call Wait | 450 | -20 | 0.4 seconds on, | No |
Conference (Reminding) | 450 | -20 | 0.4 seconds on, | No |
Call Back | 950 | -20 | Continuous | Yesas Dial |
ISUP Tone 1 | 2010 | -12 | Continuous | Yes |
ISUP Tone 2 | 1800 | -22 | Continuous | Yes |
Note The China 3 Tone Plan was taken from a specification. The Howler tone, which has varying amplitude, was not implemented. The Number Unavailable tone with 100 ms tone pulses, cannot be detected by CPA. The ISUP tones at 1800 Hz and 2010 Hz are located in the same time slots as the North American tone plan. |
CPA processing is modified to support the China network requirements. Use the system administration answer supervision templates function to control tone detection for the tones listed in Table 3-1. Supervision template processing is described in the Cisco VCO/4K System Administrator's Guide.
The supervision events and tones listed in the Answer Supervision Template screen use standard North American network terminology. Table 3-2 shows the Answer Supervision Template screen terms to use with the China 3 country feature package.
Because the conference tones are used only in conference structures and are not transmitted or received over the network, no detection functions are required.
Answer Supervision Template Event and Tone Names | China 3 Tone Names |
---|---|
Dial Tone | Dial/Call Back |
Ringback | Ringback/Queue Wait |
Busy | Busy |
Reorder | Fast Busy |
SIT Tones | Not available |
Ring Cess.1 | Not applicable |
Voice Det.1 | Not applicable |
Voice Cess.1 | Not applicable |
Wink1 | Not applicable |
Answer1 | Not applicable |
Time1 | Not applicable |
Hook Flash1 | Not applicable |
Pager Cue | Not available |
ISUP Tone | ISUP Tone 1/ISUP Tone 2 |
ISUP Cess. | ISUP Tone 1/ISUP Tone 2 |
1Not a tone. |
The tone generation information affects the Cisco VCO/4K Standard Programming Reference and the Cisco VCO/4K Extended Programming Reference. It also supersedes the tone output level specifications found in the Cisco VCO/4K Card Technical Descriptions. For more information on generating tones, refer to the Cisco VCO/4K System Administrator's Guide.
The tones and their corresponding output levels, decimal values, hexadecimal values, and port addresses are summarized in Table 3-3.
Tone | Output Level | Decimal Value | Hex Value | Port Addresses |
---|---|---|---|---|
Beep | | 0 | 00 | None |
Quiet (PCM idle pattern 01010100) | | 1 | 01 | 04C0 |
1 KHz | 0 dBm | 2 | 02 | 04C1 |
Dial | -10 dBm | 3 | 03 | 04C2 |
380 Hz | -10 dBm | 4 | 04 | 04C3 |
440 Hz | -13 dBm | 5 | 05 | 04C4 |
480 Hz | -17 dBm | 6 | 06 | 04C5 |
1400 Hz | | 7 | 07 | 04C6 |
1000 Hz @max CODEC output | | 8 | 08 | 04C7 |
Call Back | -20 dBm | 9 | 09 | 04C8 |
404 Hz | 0 dBm | 10 | 0A | 04C9 |
1004 Hz | 0 dBm | 11 | 0B | 04CA |
2804 Hz | 0 dBm | 12 | 0C | 04CB |
Steady RingBack | -15.5 dBm/freq | 13 | 0D | 04CC |
1760 Hz | -10 dBm | 14 | 0E | 04CD |
Digital Test Pattern | | 15 | 0F | 04CE |
400 Hz | -14 dBm | 16 | 10 | 04CF |
Ringback/Queue Wait | -10 dBm | 17 | 11 | 04D0 |
Busy | -10 dBm | 18 | 12 | 04D1 |
Fast Busy | -10 dBm | 19 | 13 | 04D2 |
380 Hz | -10 dBm | 20 | 14 | 04D3 |
CONFERENCE (Reminding) Tone | -20 dBm | 21 | 15 | 04D4 |
Toll | -20 dBm | | 16 | 04D5 |
Call Wait | -20 dBm | | 17 | 04D6 |
Number Unavailable | -10 dBm | 24 | 18 | 04D7 |
ISUP Tone 1 | 2010 Hz | 25 | 19 | 4D8 (ANSI) |
ISUP Tone 2 | 1800 Hz | 26 | 1A | 4D9 (ANSI) |
Reserved | | 27 to32 | 1B to 20 | 04DA to04DF |
DTMF digit 0 (steady) | -5/-7 dBm/freq | 33 | 21 | 04E0 |
DTMF digit 1 (steady) | -5/-7 dBm/freq | 34 | 22 | 04E1 |
DTMF digit 2 (steady) | -5/-7 dBm/freq | 35 | 23 | 04E2 |
DTMF digit 3 (steady) | -5/-7 dBm/freq | 36 | 24 | 04E3 |
DTMF digit 4 (steady) | -5/-7 dBm/freq | 37 | 25 | 04E4 |
DTMF digit 5 (steady) | -5/-7 dBm/freq | 38 | 26 | 04E5 |
DTMF digit 6 (steady) | -5/-7 dBm/freq | 39 | 27 | 04E6 |
DTMF digit 7 (steady) | -5/-7 dBm/freq | 40 | 28 | 04E7 |
DTMF digit 8 (steady) | -5/-7 dBm/freq | 41 | 29 | 04E8 |
DTMF digit 9 (steady) | -5/-7 dBm/freq | 42 | 2A | 04E9 |
DTMF digit A (steady) | -5/-7 dBm/freq | 43 | 2B | 04EA |
DTMF digit B (steady) | -5/-7 dBm/freq | 44 | 2C | 04EB |
DTMF digit C (steady) | -5/-7 dBm/freq | 45 | 2D | 04EC |
DTMF digit D (steady) | -5/-7 dBm/freq | 46 | 2E | 04ED |
DTMF digit * (steady) | -5/-7 dBm/freq | 47 | 2F | 04EE |
DTMF digit # (steady) | -5/-7 dBm/freq | 48 | 30 | 04EF |
MF digit 0 (steady) | -7 dBm/freq | 49 | 31 | 04F0 |
MF digit 1 (steady) | -7 dBm/freq | 50 | 32 | 04F1 |
MF digit 2 (steady) | -7 dBm/freq | 51 | 33 | 04F2 |
MF digit 3 (steady) | -7 dBm/freq | 52 | 34 | 04F3 |
MF digit 4 (steady) | -7 dBm/freq | 53 | 35 | 04F4 |
MF digit 5 (steady) | -7 dBm/freq | 54 | 36 | 04F5 |
MF digit 6 (steady) | -7 dBm/freq | 55 | 37 | 04F6 |
MF digit 7 (steady) | -7 dBm/freq | 56 | 38 | 04F7 |
MF digit 8 (steady) | -7 dBm/freq | 57 | 39 | 04F8 |
MF digit 9 (steady) | -7 dBm/freq | 58 | 3A | 04F9 |
MF digit KP (steady) | -7 dBm/freq | 59 | 3B | 04FA |
MF digit ST (steady) | -7 dBm/freq | 60 | 3C | 04FB |
MF digit ST3P | -7 dBm/freq | 61 | 3D | 04FC |
MF digit STP | -7 dBm/freq | 62 | 3E | 04FD |
MF digit ST2P | -7 dBm/freq | 63 | 3F | 04FE |
Posted: Sat Sep 28 19:27:20 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.