cc/td/doc/product/aon/adsindex
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Setting Bladelet Properties, Variables, and Rules

Contents

Assigning Bladelet Properties

Managing Variables

Variable Picker Dialog—Manage and Initialize

Advanced Variable Picker Dialog—Select, Manage, and Initialize

Managing Rules Workbench

Rules Workbench—New Rules

Rules Workbench—Custom Rules


Setting Bladelet Properties, Variables, and Rules


Revised: March, 2007, OL-11798-01

Basic tasks involving creating PEPs are discussed in Getting Started with Cisco ADS.

This section explains how to set Bladelet Properties, manage Variables, and set Rules within each Bladelet Properties window. However, each Bladelet and its Bladelet Properties is explained in ADS Bladelets Reference.


Note For more information on implementing an AON network, see the following:

Other chapters in this guide:

Getting Started with Cisco ADS

ADS Bladelets Reference

ADS PEP Attributes Reference

ADS Message Types Reference

E-Mail to Cisco ADS Support

Other guides in the AON library:

AON Installation and Administration Guide (for information on the AMC server and nodes)

AON Programming Guide (for information on custom Bladelets, custom adapters, and application program interfaces)


Contents

Assigning Bladelet Properties

Managing Variables

Managing Rules Workbench

Rules Workbench—New Rules

Rules Workbench—Custom Rules

Assigning Bladelet Properties

You assign Bladelet properties by means of the Bladelet Properties window ( Figure 2-1) and subsequent dialog boxes. To open this window, follow the procedure in the "Creating PEPs" section, in "Getting Started with Cisco ADS" chapter. The window shown here is for the AccessHTTP Bladelet.


Note Shared resources are displayed as selectable options when you configure bladelets.


Required Fields

Each required field in the Bladelet Properties window is marked by a red asterisk. Until all required fields are completed with the correct value, an error message appears on top of the Bladelet Properties window to indicate which field remains to be completed or indicates that there is a parameter type mismatch and so on before the Bladelet is completely configured.

Text Area and Auto Complete Field

The Bladelet Properties window provides either a text area or an auto complete field. An Arrow icon—toggle button—allows to toggle between the text area and auto complete text field. If the data type is of the string type, the Text area is the default; otherwise it is an auto complete text field.

The Bladelet Properties window displays an auto complete text field with a yellow background. You can enter a $ (dollar) sign to trigger the available list of variables in the current scope. You can select a variable from the list by double-clicking your mouse or by pressing the Enter key. After the variable is entered in the auto complete text field, you can use a . (dot) to get the attributes of the selected variable. You can enter $ and . after the selected variable to see if the list includes more methods.

Figure 2-1 Bladelet Properties Window

1

Bladelet properties window.

6

Manage Variables icon (displays the Variables Picker dialog box with two tabs).

2

Bladelet label.

7

Advanced Variables icon (displays the Variables Picker dialog box with three tabs).

3

Error-log message.

8

Value Settings area (those marked with a red asterisk are required for validation).

4

Error-log messages popup window.

9

Arrow icon—toggle button. This allows to toggle between the text area and auto complete text field.

5

Properties area.

10

Text area. This is the default if the data type is of the String Type; otherwise it is an auto complete text field.


Managing Variables

ADS 2.1 has a new Variable Picker dialog box. It has a tabbed panel which allows you to perform all the operations with the variables in one single dialog box. You can add, delete, rename variables. You can also initialize variables and set values for the variables before and after a Bladelet Execution. It also binds the variables to parameters in the Bladelet Properties window. You can also scope variables through this dialog, where only the variables visible in the current scope are listed in this dialog. All the variables in the current scope and also from the parents scope are visible.

You can invoke the Variable Picker Dialog window ( Figure 2-2) in two different ways:

By clicking on Manage Variables icon on the top left panel of the Bladelet Properties window.

By clicking on the Advanced Variable Options icon.

Figure 2-2 Icons to Open the Variables Dialog

1

Manage Variables icon

This opens a Variables Picker dialog window with two tab pages: Manage and Initialize.

2

Advanced Variables Option icon

This opens a Variable Picker dialog window with three tab pages: Select, Manage, and Initialize.


Variable Picker Dialog—Manage and Initialize

Manage Variables Icon

The Variables Picker Dialog ( Figure 2-3) with two tab pages—Manage and Initialize—appears when you click the Manage Variables icon within any Bladelets Properties window. You can also open the same window by Right-Clicking the mouse on a PEP, or Bladelets, or anywhere inside the PEP Developer Pane.

Variable Picker—Manage tab

You can select the Manage tab ( Figure 2-3) to add, delete, and rename variables in the current scope. A list of existing variables is provided in a table view along with the Scope information. Variables names are treated unique in a parent/child hierarchy. Therefore, you can define variables of the same name in different scopes. Deleting variables is restricted to validate if the variable is being used in any of the Parameters of the bladelets in the current scope. Renaming of a variables renames the references in the variables in all the Assignment Blocks, Rules, and also in Bladelet Properties Dialog.

Figure 2-3 Variable Picker—Manage Tab

Variables Definition

The Variables Definition window ( Figure 2-4) appears when you click the Add button in the Manage Tab dialog window.

Figure 2-4 Variables Definition

You can add new variables from the Variable Definition dialog window. You can also chose the Type and Scope of the variable along with an initialization Value. To see the complete list of Variable-Type choices, see

Variable Picker—Initialize Tab

You can select the Initialize tab ( Figure 2-5) to initialize the variables in the current scope. Each variable has a value before and after a Bladelet Execution. You are able to complete the value fields by using the Auto Complete feature, which provides the drop-down selection window. This window provides an auto complete text field with a yellow background. You can enter a $ (dollar) sign to trigger the available list of variables in the current scope. You can select a variable from the list and select it by double-clicking your mouse or by pressing the Enter key. After the variable is selected, you can also use a . (dot) to get the attributes of the selected variable. You can enter $ (dollar) or a . (dot) after the variable to see if the list includes more methods.

Figure 2-5 Variable Picker—Initialiaze Tab

Note

Advanced Variable Picker Dialog—Select, Manage, and Initialize

Advanced Variables Options

The Variables Picker dialog window ( Figure 2-6) with three tab pages—Select, Manage, and Initialize—appears when you click the Advanced Variables Options icon within any Bladelets Properties window.


Note This option provides the extra Select tab.


Advanced Variable Picker—Select tab

You can bind variables to different parameters in Bladelet Properties based on the type of the parameter. The variables listed in this tab are either of the same type or the types convertible to the binding type visible in the current scope.

Figure 2-6 Advanced Variable Picker—Select Tab


Note The variables names in the Select tab appear only after the variables are added in the Manage tab by adding and binding the new variable names in the Variable Definition window ( Figure 2-8).


Advanced Variable Picker—Manage Tab

You can select the Manage tab ( Figure 2-7) to add, delete, and rename variables in the current scope. A list of existing variables is provided in a table view along with the Scope information. Variables names are treated unique in a Parent/Child hierarchy. Therefore, you can define Variables of the same name in different scopes. Deletion of Flow Variables is restricted to validate if the Variable is being used in any of the Parameters of the bladelets in the current scope. Renaming of a Variables renames the references in the Variables in all the Assignment Blocks, Rules and also in Bladelet Properties Dialog.


Note The Mange tab provides the same function as in the two-tab window ( Figure 2-3).


Figure 2-7 Advanced Variable Picker—Manage Tab

The Variables Definition window ( Figure 2-8 ) appears when you click the Add button in the Manage Tab dialog. You can add new variables from this dialog window. You can also chose the Type and Scope of the variable along with an initialization value.

Figure 2-8 Variables Definition

Advanced Variable Picker—Initialize tab

You can select the Initialize tab ( Figure 2-9) to initialize the variables in the current scope and assign Value. Each Variable has a value before and after a Bladelet Execution. You are able to complete the value fields by using the Auto Complete feature, which provides the drop-down selection window. This window provides an auto complete text field with a yellow background. You can enter a $ (dollar) sign to trigger the available list of variables in the current scope. You can select a variable from the list and select it by double-clicking your mouse or by pressing the Enter key. After the variable is selected, you can also use a . (dot) to get the attributes of the selected variable. You can enter $ (dollar) or a . (dot) after the variable to see if the list includes more methods.


Note The Initialize tab provides the same function as in the two-tab window ( Figure 2-5).


Figure 2-9 Advanced Variable Picker—Initialize Tab

Managing Rules Workbench

The Rules Workbench dialog box ( Figure 2-10) appears when you click the Rules Wizard icon from the ADS icon bar (or choose PEP > Rules Wizard). It is also available from the Bladelet Properties window for bladelets, such as Branch, Distribute, SetDestination, Authorize, and BalanceLoad.

Figure 2-10 Rules Workbench Dialog Box

1

New icon

3

Edit icon

2

New Custom Rule icon

4

Delete icon


Rules Workbench—New Rules

The Rules Wizard—Add Conditions dialog box ( Figure 2-11) appears when you click the New icon in the Rules Workbench dialog box. You can select and configure rules from the list.

After you create a rule, this dialog box is also available from the Edit or Delete icon in the Rules Workbench dialog box. You are able to edit or delete a rule as needed.

Figure 2-11 Rules Wizard—Add Conditions

1

List of available conditions from which to select (click a condition and set its values)

2

Conditions Description area


The Variable Definition window ( Figure 2-12) appears when you select "If the message is of a certain size" and then select message in the Condition Description area of the Rules Wizard—Add Conditions dialog box ( Figure 2-11) to define the message.

This window provides an auto complete text field with a yellow background. You can enter a $ (dollar) sign to trigger the available list of variables in the current scope. You can select a variable from the list by double-clicking your mouse or by pressing the Enter key. After the variable is selected, you can also use a . (dot) to get the attributes of the selected variable. You can enter $ and . to see if the list includes more methods.

Figure 2-12 Variable Definition

1

Available Templates area (click a template)

2

Rule Description area (click a rule and set its values)


Rules Workbench—Custom Rules

The Rules Workbench—Specify Custom Rules dialog box ( Figure 2-13) appears when you click the New Custom Rules icon in the Rules Workbench dialog box. You can manually enter values that you want to include in a condition. The rules must conform to the rules XML schema. For the custom rules XML schema, see the Custom Rule XML Schema section.

Figure 2-13 Rules Workbench—Specify Custom Rule

Custom Rule XML Schema

<!-- ARML (AONS Rule Markup Language) DTD -->

<!ELEMENT ruleset (rule*)>
<!ATTLIST ruleset name NMTOKEN #IMPLIED>

<!ELEMENT rule (condition?, action*) >
<!ATTLIST rule name NMTOKEN #REQUIRED>
<!ENTITY % booleanExp "(unaryExp | binaryExp | naryExp)">

<!ELEMENT condition (%booleanExp;)>

<!ELEMENT action (assignment)* >
<!ATTLIST action conditionValue NMTOKEN #REQUIRED>
<!ENTITY % expression "(variable | %booleanExp; | constant)">

<!ELEMENT unaryExp (%expression;)>
<!ATTLIST unaryExp operator (not) #REQUIRED>

<!ELEMENT binaryExp (%expression;,%expression;)>
<!ATTLIST binaryExp operator (eq | neq | lt | lte | gt | gte) #REQUIRED>

<!ELEMENT naryExp (%expression;)+>
<!ATTLIST naryExp operator (and | or) #REQUIRED>

<!ELEMENT assignment (variable,(%expression;)?)>

<!ELEMENT constant EMPTY>
<!ATTLIST constant
type (string | boolean | byte | short | char | long | int | float | double | null) #REQUIRED
value CDATA #REQUIRED>


<!ELEMENT variable EMPTY>
<!ATTLIST variable
name NMTOKEN #REQUIRED
type (string | boolean | byte | short | char | long | int | float | double | object) #REQUIRED
extensionType (xpath | regex ) #IMPLIED
applyTo CDATA #IMPLIED
applyToType (Document | string) #IMPLIED
applyToValue CDATA #IMPLIED>


hometocprevnextglossaryfeedbacksearchhelp

Posted: Fri Mar 16 13:10:40 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.