12.2(4)T New Features
Is Cisco IOS documentation helpful? Click
here
to give us your feedback.
1-Port ADSL WAN Interface Card For Cisco 2600 Series and Cisco 3600 Series Routers
1-Port ADSL WAN Interface for the Cisco IAD2420 Series
Ability to Disable Xauth for Static IPSec Peers
ACL Default Direction
Adaptive Frame Relay Traffic Shaping for Interface Congestion
Advanced Voice Busyout
Asynchronous Line Monitoring
ATM SNMP Trap and OAM Enhancements
AutoInstall over Frame Relay-ATM Interworking Connections
BGP Conditional Route Injection
Bisync-to-IP Conversion for Automated Teller Machines
Call Admission Control for H.323 VoIP Gateways
Cisco 2600 and 3600 Routers MGCP Voice Gateway Interoperability with Cisco CallManager
Cisco H.323 Scalability and Interoperability Enhancements
Describes support for H.323 version 3 on Cisco gateways and gatekeepers.
Cisco IOS IPv6 Configuration Library
Cisco Mobile Networks
Cisco Modem User Interface
Configuring AAL2 and AAL5 for the High-Peformance ATM Advanced Integration Module on the Cisco 2600 Series
Customer Profile Idle Timer Enhancements for Interesting Traffic
Dialer CEF
Dialer Persistent
Diff-Serv-aware MPLS Traffic Engineering
DistributedDirector Enhancements for Cisco IOS Release 12.2(4)T
Distributed Link Fragmentation and Interleaving for Frame Relay and ATM Interfaces
Distributed Management Event and Expression MIB Persistence
Distinguished Name Based Crypto Maps
Enhanced Test Command
Enhancements to H.323 Call Statistics
Frame Relay 64-Bit Counters
Frame Relay MIB Enhancements
H.323 Version 2 Support
Inter-Domain Gatekeeper Security Enhancement
IP to ATM Class of Service Mapping for SVC Bundles
IPSec - SNMP Support
L2TP Large-Scale Dial-Out
L2TP Security
Leased and Switched BRI Interface for ETSI NET3
Location Confirmation Enhancements for Alternate Endpoints
MD5 File Validation
MGCP 1.0 Including NCS 1.0 and TGCP 1.0 Profiles
MPLS Label Distribution Protocol
MPLS Label Switch Controller and Enhancements
MPLS QoS Multi-VC Mode for PA-A3
MPLS Traffic Engineering (TE)--Automatic Bandwidth Adjustment for TE Tunnels
MPLS Traffic Engineering (TE)--IP Explicit Address Exclusion
Multiservice Interchange (MIX) for Cisco 2600 and 3600 Series Modular Access Routers
NAT - Ability to Use Route Maps with Static Translations
NAT - Static Mapping Support with HSRP for High Availability
NAT - Translation of External IP Addresses Only
NetFlow ToS-Based Router Aggregation
Network-Based Application Recognition
The NBAR and dNBAR features on all platforms for all Cisco IOS Releases are covered in this document.
Offload Server Accounting Enhancement
Optimized PPP Negotiation
OSPF ABR Type 3 LSA Filtering
OSPF Stub Router Advertisement
OSPF Update Packet-Pacing Configurable Timers
PIM MIB Extension for IP Multicast
PPPoA/PPPoE Autosense for ATM PVCs
PPPoE Session Limit
PRI Backhaul Using the Stream Control Transmission Protocol and the ISDN Q.921 User Adaptation Layer
Added Cisco AS5850 platform support
PRI/Q.931 Signaling Backhaul for Call Agent Applications
PSTN Fallback for Cisco 7200 and 7500 Series Routers
RADIUS Attribute 82: Tunnel Assignment ID
RADIUS Attribute Screening
RADIUS Tunnel Preference for Load Balancing and Fail-Over
Redial Enhancements
Sequential Location Request Enhancement
SS7 Four-Link Support for Cisco Signaling Link Terminal
Stream Control Transmission Protocol (SCTP) Release 1
T.38 Fax Services for Cisco 1750 Access Routers
TCP MSS Adjustment
Timer and Retry Enhancements for L2TP and L2F
Trunk-Management Features
Two-Rate Policer
VPDN-Group Session Limiting
BGP Prefix-Based Outbound Route Filtering
All contents are copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices
and
Privacy Statement
.