New Features in Release 12.0(28)S

• Any Transport over MPLS

• Cisco Express Forwarding

• Cisco IOS IPv6 Configuration Library

• Cisco IOS Software Configuration for the Cisco 10720 Internet Router

• Distributed ATM OAM Support (dOAM)

• Fast-Path Multicast Forwarding on Cisco 12000 Series Engine 2 and ISE Line Cards

• Frame Relay Conditional Debug Support

• Layer 2 Tunnel Protocol Version 3

• Low Latency Queueing with Priority Percentage Support

• MPLS Label Switching Router MIB

• MPLS Quality of Service (QoS) Multi-VC Mode on the Cisco 10000 Series Router

• MPLS Traffic Engineering: Shared Risk Link Groups (SRLG)

• MPLS VPNs over IP Tunnels

• Multilink Frame Relay over L2TPv3/AToM

• Packet Classification Using the Frame Relay DLCI Number

• PBR Recursive Next Hop

• PIM Dense Mode Fallback Prevention in a Network Following RP Information Loss

• PPP/MLP MRRU Negotiation Configuration

• QoS: ATM Cell-Based Policer

• QoS: ATM-CLP and Layer 2 CoS-Based WRED

• QoS: Classification of Locally Sourced Packets

• QoS: Enhancements to Single QoS Policy Definition for a Physical Interface (L3/1C/nD) including Match FR-DLCI

• QoS: Enhancement to Subinterface QoS Policy Definitions (L3/nC/nD) Including Proportional Bandwidth Allocation

• QoS: Implicit Queue Limit

• QoS: L2 Overhead Specification for Shaping and Policing Parameters for Ethernet

• QoS: Match on ATM CLP

• QoS: Percentage-Based and Time-Based Policing Parameters

• QoS: Percentage-Based Policing

• QoS: Percentage-Based Shaping

• QoS: Time-Based Thresholds for WRED and Queue Limit

• QoS: Time-Based Thresholds for WRED and Queue Limit for the Cisco 12000 Series Router

• QoS: Tunnel Marking for L2TPv3 Tunnels

• Stacked VLAN Processing

• Stateful Switchover

• Transparent Layer 2 Protocol Tunneling and PDU Filtering

• Upgrade Secondary ROMmon CLI