System Reload

Use the System Reload window to reload one or several switches. Reloading saves the active configuration file and reboots the selected switches. During this process, the switches are not accessible, and connectivity is interrupted briefly between the switches and end stations.

To reload the system:

1. In the Available Devices list, select the switches that you want to reload.
   To select all switches in this list, click Select All.
2. Click Add to move your selections move to the Selected Devices list.
   To remove switches from this list, select the switches and click Remove.
   To remove all switches from the Selected Devices list, click Select All and then Remove.
3. Click Reload Devices to copy the active configuration to Flash memory and reboot the switch.