With the Cluster Command Configuration window, you can enable and disable the command
switch, and name the cluster.
Your switch must be command-capable and not part of any cluster to enable the command
switch feature. When you enable the command switch, you must also name the cluster.
To enable the command switch:
From the Command Switch Status drop-down list, select Enable.
In the Cluster Name field, enter a cluster name up to 31 characters.
Click OK.
To disable the command switch:
Select Disable from the Command Switch Status drop-down list.
Click OK.
When the command switch is disabled, the Cluster Management option is grayed out on the
Cluster menu, so you cannot access Cluster Management software.