Cisco 700 Series Router Software Release Notes

• Release Notes for Cisco 700 Series Router Software Release 4.4.6
  Resolved caveats for default port handler and new command.

• Release Notes for Cisco 700 Series Router Software Release 4.4.5
  Resolved caveats for PAT, memory leaks, and debug messages.

• Release Notes for Cisco 700 Series Router Software Release 4.4.4
  Non-CAPI version of NET3 image, and fixes for PPP.

• Release Notes for Cisco 700 Series Router Software Release 4.4.3
  Fixes for X.25 images, including AOCD, DNS, and NetBIOS filters.

• Release Notes for Cisco 700 Series Router Software Release 4.4.2
  Add NetBIOS filter command. Modification of the set tpad parity, test pots ring, and show packets commands. Also support for PAT and commas in user names.

• Release Notes for Cisco 700 Series Router Software Version 4.4.1
  Limited release - c700-in.bxd-NET3.44-1.bin image only. Includes Remote CAPI and Magic Number support.

• Release Notes for Cisco 700 Software Release 4.3(1)
  Enhanced AT commands, Triggered RIP and compression in the Internet Ready image.

• Release Notes for Cisco 700 Series Router SW Release 4.0(2)
  Call Forwarding supplementary service for Sweden and Finland (NET3). Forces the dynamically negotiated IP address to be assigned to the user-defined profile. Authentication sequence is not required for leased line connections.

• Feature Pack Information

• Cisco 700 Series - Software Release 4.4.7