home | O'Reilly's CD bookshelfs | FreeBSD | Linux | Cisco | Cisco Exam  


Running Linux, 4th Ed.Running Linux, 4th Ed.Search this book

8.3. Managing System Logs

The syslogd utility logs various kinds of system activity, such as debugging output from sendmail and warnings printed by the kernel. syslogd runs as a daemon and is usually started in one of the rc files at boot time.

The file /etc/syslog.conf is used to control where syslogd records information. Such a file might look like the following (even though they tend to be much more complicated on most systems):

*.info;*.notice    /var/log/messages 
mail.debug         /var/log/maillog 
*.warn             /var/log/syslog 
kern.emerg         /dev/console

The first field of each line lists the kinds of messages that should be logged, and the second field lists the location where they should be logged. The first field is of the format:

facility.level [; facility.level ... ]

where facility is the system application or facility generating the message, and level is the severity of the message.

For example, facility can be mail (for the mail daemon), kern (for the kernel), user (for user programs), or auth (for authentication programs such as login or su). An asterisk in this field specifies all facilities.

level can be (in increasing severity): debug, info, notice, warning, err, crit, alert, or emerg.

In the previous /etc/syslog.conf, we see that all messages of severity info and notice are logged to /var/log/messages, all debug messages from the mail daemon are logged to /var/log/maillog, and all warn messages are logged to /var/log/syslog. Also, any emerg warnings from the kernel are sent to the console (which is the current virtual console, or an xterm started with the -C option).

The messages logged by syslogd usually include the date, an indication of what process or facility delivered the message, and the message itself — all on one line. For example, a kernel error message indicating a problem with data on an ext2fs filesystem might appear in the log files, as in:

Dec  1 21:03:35 loomer kernel: EXT2-fs error (device 3/2): 
  ext2_check_blocks_bit map: Wrong free blocks count in super block, 
  stored = 27202, counted = 27853

Similarly, if an su to the root account succeeds, you might see a log message, such as:

Dec 11 15:31:51 loomer su: mdw on /dev/ttyp3

Log files can be important in tracking down system problems. If a log file grows too large, you can empty it using cat /dev/null > logfile. This clears out the file, but leaves it there for the logging system to write to.

Your system probably comes equipped with a running syslogd and an /etc/syslog.conf that does the right thing. However, it's important to know where your log files are and what programs they represent. If you need to log many messages (say, debugging messages from the kernel, which can be very verbose) you can edit syslog.conf and tell syslogd to reread its configuration file with the command:

kill -HUP `cat /var/run/syslog.pid`

Note the use of backquotes to obtain the process ID of syslogd, contained in /var/run/syslog.pid.

Other system logs might be available as well. These include:

/var/log/wtmp
This file contains binary data indicating the login times and duration for each user on the system; it is used by the last command to generate a listing of user logins. The output of last might look like:

mdw      tty3                Sun Dec 11 15:25   still logged in
mdw      tty3                Sun Dec 11 15:24 - 15:25  (00:00)
mdw      tty1                Sun Dec 11 11:46   still logged in
reboot   ~                   Sun Dec 11 06:46

A record is also logged in /var/log/wtmp when the system is rebooted.

/var/run/utmp
This is another binary file that contains information on users currently logged into the system. Commands such as who, w, and finger use this file to produce information on who is logged in. For example, the w command might print:

  3:58pm  up  4:12,  5 users,  load average: 0.01, 0.02, 0.00
User     tty       login@  idle   JCPU   PCPU  what
mdw      ttyp3    11:46am    14                -
mdw      ttyp2    11:46am            1         w
mdw      ttyp4    11:46am                      kermit
mdw      ttyp0    11:46am    14                bash

We see the login times for each user (in this case, one user logged in many times), as well as the command currently being used. The w(1) manual page describes all the fields displayed.

/var/log/lastlog
This file is similar to wtmp but is used by different programs (such as finger to determine when a user was last logged in).

Note that the format of the wtmp and utmp files differs from system to system. Some programs may be compiled to expect one format and others another format. For this reason, commands that use the files may produce confusing or inaccurate information — especially if the files become corrupted by a program that writes information to them in the wrong format.

Log files can get quite large, and if you do not have the necessary hard-disk space, you have to do something about your partitions being filled too fast. Of course, you can delete the log files from time to time, but you may not want to do this, because the log files also contain information that can be valuable in crisis situations.

One option is to copy the log files from time to time to another file and compress this file. The log file itself starts at 0 again. Here is a short shell script that does this for the log file /var/log/messages:

mv /var/log/messages /var/log/messages-backup
cp /dev/null /var/log/messages

CURDATE=`date +"%m%d%y"`

mv /var/log/messages-backup /var/log/messages-$CURDATE
gzip /var/log/messages-$CURDATE

First, we move the log file to a different name and then truncate the original file to 0 bytes by copying to it from /dev/null. We do this so that further logging can be done without problems while the next steps are done. Then, we compute a date string for the current date that is used as a suffix for the filename, rename the backup file, and finally compress it with gzip.

You might want to run this small script from cron, but as it is presented here, it should not be run more than once a day — otherwise the compressed backup copy will be overwritten because the filename reflects the date but not the time of day (of course, you could change the date format string to include the time). If you want to run this script more often, you must use additional numbers to distinguish between the various copies.

You could make many more improvements here. For example, you might want to check the size of the log file first and copy and compress it only if this size exceeds a certain limit.

Even though this is already an improvement, your partition containing the log files will eventually get filled. You can solve this problem by keeping around only a certain number of compressed log files (say, 10). When you have created as many log files as you want to have, you delete the oldest, and overwrite it with the next one to be copied. This principle is also called log rotation. Some distributions have scripts like savelog or logrotate that can do this automatically.

To finish this discussion, it should be noted that most recent distributions, such as SuSE, Debian, and Red Hat, already have built-in cron scripts that manage your log files and are much more sophisticated than the small one presented here.



Library Navigation Links

Copyright © 2003 O'Reilly & Associates. All rights reserved.