home | O'Reilly's CD bookshelfs | FreeBSD | Linux | Cisco | Cisco Exam  


sed & awk

sed & awkSearch this book
Previous: Availability of sed and awk Preface Next: Conventions Used in This Handbook
 

Obtaining Example Source Code

You can obtain the source code for the programs presented in this book from O'Reilly & Associates through their Internet server. The example programs in this book are available electronically in a number of ways: by FTP, Ftpmail, BITFTP, and UUCP. The cheapest, fastest, and easiest ways are listed first. If you read from the top down, the first one that works for you is probably the best. Use FTP if you are directly on the Internet. Use Ftpmail if you are not on the Internet, but can send and receive electronic mail to Internet sites (this includes CompuServe users). Use BITFTP if you can send electronic mail via BITNET. Use UUCP if none of the above works.

FTP

To use FTP, you need a machine with direct access to the Internet. A sample session is shown, with what you should type in boldface.

$ ftp ftp.oreilly.com


Connected to ftp.oreilly.com.
220 FTP server (Version 6.21 Tue Mar 10 22:09:55 EST 1992) ready.
Name (ftp.oreilly.com:yourname): anonymous


331 Guest login ok, send domain style e-mail address as password.
Password: yourname@domain.name

   (Use your user name and host here)

230 Guest login ok, access restrictions apply.
ftp> cd /published/oreilly/nutshell/sedawk_2


250 CWD command successful.
ftp> binary

   (Very important! You must specify binary transfer for compressed files.)

200 Type set to I.
ftp> get progs.tar.gz


200 PORT command successful.
150 Opening BINARY mode data connection for progs.tar.gz.
226 Transfer complete.
ftp> quit


221 Goodbye.

The file is a gzip compressed tar archive; extract the files from the archive by typing:

$ gzcat progs.tar.gz | tar xvf -

System V systems require the following tar command instead:

$ gzcat progs.tar.gz | tar xof -

If gzcat is not available on your system, use separate gunzip and tar commands.

$ gunzip progs.tar.gz


$ tar xvf progs.tar

Ftpmail

Ftpmail is a mail server available to anyone who can send electronic mail to and receive it from Internet sites. This includes any company or service provider that allows email connections to the Internet. Here's how you do it. You send mail to . In the message body, give the FTP commands you want to run. The server will run anonymous FTP for you and mail the files back to you. To get a complete help file, send a message with no subject and the single word "help" in the body. The following is a sample mail session that should get you the examples. This command sends you a listing of the files in the selected directory and the requested example files. The listing is useful if there's a later version of the examples you're interested in.

$ mail ftpmail@online.oreilly.com


Subject:
reply-to

 yourname@domain.name

     (Where you want files mailed)

open
cd /published/oreilly/nutshell/sedawk_2
dir
mode binary
uuencode
get progs.tar.gz
quit
.

A signature at the end of the message is acceptable as long as it appears after "quit."

BITFTP

BITFTP is a mail server for BITNET users. You send it electronic mail messages requesting files, and it sends you back the files by electronic mail. BITFTP currently serves only users who send it mail from nodes that are directly on BITNET, EARN, or NetNorth. To use BITFTP, send mail containing your ftp commands to . For a complete help file, send HELP as the message body. The following is the message body you send to BITFTP:

FTP  ftp.oreilly.com  NETDATA
USER  anonymous
PASS  yourname@yourhost.edu   Put your Internet email address here (not your BITNET address)

CD /published/oreilly/nutshell/sedawk_2
DIR
BINARY
GET  progs.tar.gz
QUIT

Once you've got the desired file, follow the directions under FTP to extract the files from the archive. Since you are probably not on a UNIX system, you may need to get versions of uudecode , gunzip , atob , and tar for your system. VMS, DOS, and Mac versions are available.

UUCP

UUCP is standard on virtually all UNIX systems and is available for IBM-compatible PCs and Apple Macintoshes. The examples are available by UUCP via modem from UUNET; UUNET's connect-time charges apply. If you or your company has an account with UUNET, you have a system somewhere with a direct UUCP connection to UUNET. Find that system, and type:

uucp uunet\!~/published/oreilly/nutshell/sedawk_2/progs.tar.gz yourhost\!~/yourname/

The backslashes can be omitted if you use a Bourne-style shell (sh , ksh , bash , zsh , pdksh ) instead of csh or tcsh . The file should appear some time later (up to a day or more) in the directory /usr/spool/uucppublic/yourname . If you don't have an account, but would like one so that you can get electronic mail, contact UUNET at 703-206-5400. It's a good idea to get the file /published/oreilly/ls-lR.Z as a short test file containing the filenames and sizes of all the files available. Once you've got the desired file, follow the directions under FTP to extract the files from the archive.


Previous: Availability of sed and awk sed & awk Next: Conventions Used in This Handbook
Availability of sed and awk Book Index Conventions Used in This Handbook

The UNIX CD Bookshelf NavigationThe UNIX CD BookshelfUNIX Power ToolsUNIX in a NutshellLearning the vi Editorsed & awkLearning the Korn ShellLearning the UNIX Operating System