This section is about setting up an ADSL Internet connection using an ethernet PPPoE modem.
You will require a subscription with an Internet Service Provider, and an installed, functional Internet connection. Most modems have a light which will be lit if it is currently connected to the Internet. You will also need your username and password for the Internet account.
To set up the modem:
-
Open a terminal ( → → )
-
In the terminal, type
sudo pppoeconf -
A text-based menu program will guide you through the following steps:
-
Confirm that your Ethernet card is detected.
-
Enter your username.
-
Enter your password.
-
If you already have a PPPoE Connection configured, you will be asked if it may be modified.
-
Popular options: you are asked if you want the “noauth” and “defaultroute” options and to remove “nodetach”. Choose .
-
Use peer DNS - choose .
-
Limited MSS problem - choose .
-
When you are asked if you want to connect at start up, you will probably want to say yes.
-
Finally you are asked if you want to establish the connection immediately.
-
-
Once you have finished these steps, your connection should be working.
To start your ADSL connection on demand, in a terminal ( → → ) type:
sudo pon dsl-provider
