Strings
PHP Manual

sprintf

(PHP 4, PHP 5)

sprintf — Return a formatted string

Description

string sprintf ( string $format [, mixed $args [, mixed $... ]] )

Returns a string produced according to the formatting string format .

Parameters

format

The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().

Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:

  1. An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
  2. An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
  3. An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
  4. An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
  5. An optional precision specifier that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string.

  6. A type specifier that says what type the argument data should be treated as. Possible types:

    • % - a literal percent character. No argument is required.
    • b - the argument is treated as an integer, and presented as a binary number.
    • c - the argument is treated as an integer, and presented as the character with that ASCII value.
    • d - the argument is treated as an integer, and presented as a (signed) decimal number.
    • e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
    • u - the argument is treated as an integer, and presented as an unsigned decimal number.
    • f - the argument is treated as a float, and presented as a floating-point number (locale aware).
    • F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
    • o - the argument is treated as an integer, and presented as an octal number.
    • s - the argument is treated as and presented as a string.
    • x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
    • X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).

The format string supports argument numbering/swapping. Here is an example:

Example#1 Argument swapping

<?php
$format = 'There are %d monkeys in the %s';
printf($format, $num, $location);
?>
This might output, "There are 5 monkeys in the tree". But imagine we are creating a format string in a separate file, commonly because we would like to internationalize it and we rewrite it as:

Example#2 Argument swapping

<?php
$format = 'The %s contains %d monkeys';
printf($format, $num, $location);
?>
We now have a problem. The order of the placeholders in the format string does not match the order of the arguments in the code. We would like to leave the code as is and simply indicate in the format string which arguments the placeholders refer to. We would write the format string like this instead:

Example#3 Argument swapping

<?php
$format = 'The %2$s contains %1$d monkeys';
printf($format, $num, $location);
?>
An added benefit here is that you can repeat the placeholders without adding more arguments in the code. For example:

Example#4 Argument swapping

<?php
$format = 'The %2$s contains %1$d monkeys.
           That\'s a nice %2$s full of %1$d monkeys.';
printf($format, $num, $location);
?>

args

...

Return Values

Returns a string produced according to the formatting string format .

ChangeLog

Version Description
4.0.6 Support for argument numbering/swapping was added

Examples

Example#5 printf(): various examples

<?php
$n =  43951789;
$u = -43951789;
$c = 65; // ASCII 65 is 'A'

// notice the double %%, this prints a literal '%' character
printf("%%b = '%b'\n", $n); // binary representation
printf("%%c = '%c'\n", $c); // print the ascii character, same as chr() function
printf("%%d = '%d'\n", $n); // standard integer representation
printf("%%e = '%e'\n", $n); // scientific notation
printf("%%u = '%u'\n", $n); // unsigned integer representation of a positive integer
printf("%%u = '%u'\n", $u); // unsigned integer representation of a negative integer
printf("%%f = '%f'\n", $n); // floating point representation
printf("%%o = '%o'\n", $n); // octal representation
printf("%%s = '%s'\n", $n); // string representation
printf("%%x = '%x'\n", $n); // hexadecimal representation (lower-case)
printf("%%X = '%X'\n", $n); // hexadecimal representation (upper-case)

printf("%%+d = '%+d'\n", $n); // sign specifier on a positive integer
printf("%%+d = '%+d'\n", $u); // sign specifier on a negative integer
?>

The above example will output:

%b = '10100111101010011010101101' %c = 'A' %d = '43951789' %e = '4.39518e+7' %u = '43951789' %u = '4251015507' %f = '43951789.000000' %o = '247523255' %s = '43951789' %x = '29ea6ad' %X = '29EA6AD' %+d = '+43951789' %+d = '-43951789'

Example#6 printf(): string specifiers

<?php
$s = 'monkey';
$t = 'many monkeys';

printf("[%s]\n",      $s); // standard string output
printf("[%10s]\n",    $s); // right-justification with spaces
printf("[%-10s]\n",   $s); // left-justification with spaces
printf("[%010s]\n",   $s); // zero-padding works on strings too
printf("[%'#10s]\n",  $s); // use the custom padding character '#'
printf("[%10.10s]\n", $t); // left-justification but with a cutoff of 10 characters
?>

The above example will output:

[monkey] [ monkey] [monkey ] [0000monkey] [####monkey] [many monke]

Example#7 sprintf(): zero-padded integers

<?php
$isodate = sprintf("%04d-%02d-%02d", $year, $month, $day);
?>

Example#8 sprintf(): formatting currency

<?php
$money1 = 68.75;
$money2 = 54.35;
$money = $money1 + $money2;
// echo $money will output "123.1";
$formatted = sprintf("%01.2f", $money);
// echo $formatted will output "123.10"
?>

Example#9 sprintf(): scientific notation

<?php
$number = 362525200;

echo sprintf("%.3e", $number); // outputs 3.625e+8
?>

See Also

Strings
PHP Manual