Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP Integrity Virtual Machines Version 4.0 Installation, Configuration, and Administration > Chapter 9 Managing Guests

HP AVIO Stor EFI Driver Enumeration Policy

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

The default enumeration policy of the “HP AVIO Stor EFI Driver” is to enumerate all LUNs, — that is, to discover and list all the LUNs under the AVIO storage adapter. Use the drvcfg EFI utility to change the enumeration policy to do the following:

  • Enumerate boot LUNs only.

  • Enumerate all LUNs.

The following example shows how to change the enumeration policy to enumerate boot LUNs only:

Shell> drvcfg -s HP AVIO Stor Driver Configuration ================================== Enumerate only boot LUNs (Y/N)? [N]:Y Drv[2F] Ctrl[ALL] Lang[eng] - Options set. Action Required is None None None Shell> Reset the guest for the change to take effect vMP MAIN MENU CO: Console CM: Command Menu CL: Console Log SL: Show Event Logs VM: Virtual Machine Menu HE: Main Help Menu X: Exit Connection [g1] vMP> CM (Use Ctrl-B to return to vMP main menu.) [g1] vMP:CM> RS At next boot only boot LUN will be enumerated Use ^ and v to change option(s). Use Enter to select an option Loading.: EFI Shell [Built-in] EFI Shell version 1.10 [14.62]onsole - - - - - - - - - - - - Device mapping table fs0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigBEC59C34-E6C8-11DB-8002-D6217B60E588) fs1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part3,SigBEC59C70-E6C8-11DB-8004-D6217B60E588) blk0 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0) blk1 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part1,SigBEC59C34-E6C8-11DB-8002-D6217B60E588) blk2 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part2,SigBEC59C52-E6C8-11DB-8003-D6217B60E588) blk3 : Acpi(PNP0A03,0)/Pci(0|0)/Scsi(Pun0,Lun0)/HD(Part3,SigBEC59C70-E6C8-11DB-8004-D6217B60E588) startup.nsh> echo -off setting hpux path(\EFI\HPUX)... type 'fs[x]:' where x is your bootdisk (0, 1, 2...) type 'hpux' to start hpux bootloader
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2008 Hewlett-Packard Development Company, L.P.