Commands: vPars Manpages

The purpose of this document is to describe vPars concepts and how to perform common vPars tasks. For detailed information on the vPars commands, including description, syntax, all the command line options, and the required state of a virtual partition for each command, see the vPars manpages.




	NOTE: The vparresources(5) manpage contains critical information about the vPars commands, including option precedence and the required state of a virtual partition prior to command execution. The vparcreate(1M) and vparmodify(1M) manpages contain autoboot information.

Note the following on vPars manpages:

If your OS is setup to use manpage keywords and vPars is installed, you can run the following to see the current list of vPars manpages.
# man -k vpar
For more information on manpage keywords and using catman -w, see the manpage catman(1M) and the manual Managing Systems and Workgroups (11.11, 11.23) or HP-UX Systems Administrator’s Guide (11.31), available at http://docs.hp.com.
As of this printing, the vPars manpages are:
vecheck(1), vparadmin(1M), vparboot(1M), vparconfig(1M), vparcreate(1M), vpardbprofile(1M), vparefiutil(1M), vparenv(1M), vparmodify(1M), vparremove(1M), vparreset(1M), vparstatus(1M), vparutil(1M), vparresources(5), vpartition(5), vpmon(5)

Commands: vPars Manpages

Technical documentation

» Table of Contents

» Glossary

» Index