Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference > R

rpc(3N)

HP-UX 11i Version 3: February 2007
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

NAME

rpc — library routines for remote procedure calls

SYNOPSIS

cc [ flag ]... file... -lnsl [ library ]...

#include <rpc/rpc.h>

#include <netconfig.h>

DESCRIPTION

These routines allow C language programs to make procedure calls on other machines across a network. First, the client sends a request to the server. On receipt of the request, the server calls a dispatch routine to perform the requested service, and then sends back a reply.

All RPC routines require the header <rpc/rpc.h>. Routines that take a netconfig structure also require that <netconfig.h> be included. Applications using RPC and XDR routines should be linked with the libnsl library.

The HP-UX implementation of RPC only supports the X/Open Transport Interface (XTI). Applications that are written using the Transport Layer Interface (TLI) and wish to use RPC, must convert their application to XTI.

Multithread Considerations

In the case of multithreaded applications, the _REENTRANT flag must be defined on the command line at compilation time (-D_REENTRANT). Defining this flag enables a thread-specific version of rpc_createerr (see rpc_clnt_create(3N)).

When used in multithreaded applications, client-side routines are thread-safe. CLIENT handles (see rpc_clnt_create(3N)) can be shared between threads; however, in this implementation requests by different threads are serialized (that is, the first request will receive its results before the second request is sent).

When used in multithreaded applications, server-side routines are usually not thread-safe. In this implementation the service transport handle, SVCXPRT (see rpc_svc_create(3N)), contains a single data area for decoding arguments and encoding results. Therefore, this structure cannot be freely shared between threads that call functions that do this. Routines that are affected by this restriction are marked as unsafe for multithreaded applications (see rpc_svc_calls(3N)).

See the MULTITHREAD USAGE section of the routines' respective manual pages.

Nettype

Some of the high-level RPC interface routines take a nettype string as one of the parameters (for example, clnt_create(), svc_create(), rpc_reg(), rpc_call()). This string defines a class of transports which can be used for a particular application.

nettype can be one of the following:

netpath

Choose from the transports which have been indicated by their token names in the NETPATH environment variable. If NETPATH is unset or NULL, it defaults to visible. netpath is the default nettype.

visible

Choose the transports which have the visible flag (v) set in the /etc/netconfig file.

circuit_v

This is same as visible except that it chooses only the connection oriented transports (semantics tpi_cots or tpi_cots_ord) from the entries in the /etc/netconfig file.

datagram_v

This is same as visible except that it chooses only the connectionless datagram transports (semantics tpi_clts) from the entries in the /etc/netconfig file.

circuit_n

This is same as netpath except that it chooses only the connection oriented datagram transports (semantics tpi_cots or tpi_cots_ord).

datagram_n

This is same as netpath except that it chooses only the connectionless datagram transports (semantics tpi_clts).

udp

This refers to Internet UDP.

tcp

This refers to Internet TCP.

If nettype is NULL, it defaults to netpath. The transports are tried in left to right order in the NETPATH variable or in top to down order in the /etc/netconfig file.

Derived Types

In a 64-bit environment, the derived types are defined as follows:

typedef unsigned long rpcprog_t; typedef unsigned long rpcvers_t; typedef unsigned long rpcproc_t; typedef unsigned long rpcprot_t; typedef unsigned long rpcport_t; typedef int32_t rpc_inline_t;

In a 32-bit environment, the derived types are defined as follows:

typedef unsigned long rpcprog_t; typedef unsigned long rpcvers_t; typedef unsigned long rpcproc_t; typedef unsigned long rpcprot_t; typedef unsigned long rpcport_t; typedef long rpc_inline_t;

Data Structures

Some of the data structures used by the RPC package are shown below.

The AUTH Structure

union des_block { struct { u_int32 high; u_int32 low; } key; char c[8]; }; typedef union des_block des_block; extern bool_t xdr_des_block();

/* * Authentication info. Opaque to client. */ struct opaque_auth { enum_t oa_flavor; /* flavor of auth */ caddr_t oa_base; /* address of more auth stuff */ u_int oa_length; /* not to exceed MAX_AUTH_BYTES */ };

/* * Auth handle, interface to client side authenticators. */ typedef struct { struct opaque_auth ah_cred; struct opaque_auth ah_verf; union des_block ah_key; struct auth_ops { void (*ah_nextverf)(); int (*ah_marshal)(); /* nextverf & serialize */ int (*ah_validate)(); /* validate verifier */ int (*ah_refresh)(); /* refresh credentials */ void (*ah_destroy)(); /* destroy this structure */ } *ah_ops; caddr_t ah_private; } AUTH;

The CLIENT Structure

/* * Client rpc handle. * Created by individual implementations. * Client is responsible for initializing auth. */ typedef struct { AUTH *cl_auth; /* authenticator */ struct clnt_ops { enum clnt_stat (*cl_call)(); /* call remote procedure */ void (*cl_abort)(); /* abort a call */ void (*cl_geterr)(); /* get specific error code */ bool_t (*cl_freeres)(); /* frees results */ void (*cl_destroy)(); /* destroy this structure */ bool_t (*cl_control)(); /* the ioctl() of rpc */ int (*cl_settimers)(); /* set rpc level timers */ } *cl_ops; caddr_t cl_private; /* private stuff */ char *cl_netid; /* network identifier */ char *cl_tp; /* device name */ } CLIENT;

The SVCXPRT Structure

enum xprt_stat { XPRT_DIED, XPRT_MOREREQS, XPRT_IDLE };

/* * Server side transport handle */ typedef struct { int xp_fd; /* file descriptor for the server handle */ u_short xp_port; /* obsolete */ struct xp_ops { bool_t (*xp_recv)(); /* receive incoming requests */ enum xprt_stat (*xp_stat)(); /* get transport status */ bool_t (*xp_getargs)(); /* get arguments */ bool_t (*xp_reply)(); /* send reply */ bool_t (*xp_freeargs)(); /* free mem allocated for args */ void (*xp_destroy)(); /* destroy this struct */ } *xp_ops; int xp_addrlen; /* length of remote addr. Obsolete */ char *xp_tp; /* transport provider device name */ char *xp_netid; /* network identifier */ struct netbuf xp_ltaddr; /* local transport address */ struct netbuf xp_rtaddr; /* remote transport address */ char xp_raddr[16]; /* remote address. Obsolete */ struct opaque_auth xp_verf; /* raw response verifier */ caddr_t xp_p1; /* private: for use by svc ops */ caddr_t xp_p2; /* private: for use by svc ops */ caddr_t xp_p3; /* private: for use by svc lib */ int xp_type /* transport type */ } SVCXPRT;

The svc_req Structure

struct svc_req { rpcprog_t rq_prog; /* service program number */ rpcvers_t rq_vers; /* service protocol version */ rpcproc_t rq_proc; /* the desired procedure */ struct opaque_auth rq_cred; /* raw creds from the wire */ caddr_t rq_clntcred; /* read only cooked cred */ SVCXPRT *rq_xprt; /* associated transport */ };

The XDR Structure

/* * XDR operations. * XDR_ENCODE causes the type to be encoded into the stream. * XDR_DECODE causes the type to be extracted from the stream. * XDR_FREE can be used to release the space allocated by an XDR_DECODE * request. */ enum xdr_op { XDR_ENCODE=0, XDR_DECODE=1, XDR_FREE=2 };

/* * This is the number of bytes per unit of external data. */ #define BYTES_PER_XDR_UNIT (4) #define RNDUP(x) ((((x) + BYTES_PER_XDR_UNIT - 1) / BYTES_PER_XDR_UNIT) * BYTES_PER_XDR_UNIT)

/* * A xdrproc_t exists for each data type which is to be encoded or * decoded. The second argument to the xdrproc_t is a pointer to * an opaque pointer. The opaque pointer generally points to a * structure of the data type to be decoded. If this points to 0, * then the type routines should allocate dynamic storage of the * appropriate size and return it. * bool_t (*xdrproc_t)(XDR *, caddr_t *); */ typedef bool_t (*xdrproc_t)();

/* * The XDR handle. * Contains operation which is being applied to the stream, * an operations vector for the particular implementation */ typedef struct { enum xdr_op x_op; /* operation; fast additional param */ struct xdr_ops { bool_t (*x_getlong)(); /* get a long from underlying stream */ bool_t (*x_putlong)(); /* put a long to underlying stream */ bool_t (*x_getbytes)(); /* get bytes from underlying stream */ bool_t (*x_putbytes)(); /* put bytes to underlying stream */ u_int (*x_getpostn)(); /* returns bytes off from beginning */ bool_t (*x_setpostn)(); /* lets you reposition the stream */ rpc_inline_t *(*x_inline)(); /* buf quick ptr to buffered data */ void (*x_destroy)(); /* free privates of this xdr_stream */ bool_t (*x_control)(); /* change/retrieve client object info */ bool_t (*x_getint32)(); /* get an int from underlying stream */ bool_t (*x_putint32)(); /* put an int to underlying stream */ } *x_ops; caddr_t x_public; /* users' data */ caddr_t x_private; /* pointer to private data */ caddr_t x_base; /* private used for position info */ int x_handy; /* extra private word */ } XDR;

Index to Routines

The following table lists RPC routines and the manual reference pages on which they are described:

RPC Routine

Manual Reference Page

auth_destroy

rpc_clnt_auth(3N)

authdes_create

rpc_soc(3N)

authdes_getucred

secure_rpc(3N)

authdes_seccreate

secure_rpc(3N)

authnone_create

rpc_clnt_auth(3N)

authsys_create

rpc_clnt_auth(3N)

authsys_create_default

rpc_clnt_auth(3N)

authunix_create

rpc_soc(3N)

authunix_create_default

rpc_soc(3N)

callrpc

rpc_soc(3N)

clnt_broadcast

rpc_soc(3N)

clnt_call

rpc_clnt_calls(3N)

clnt_control

rpc_clnt_create(3N)

clnt_create

rpc_clnt_create(3N)

clnt_create_timed

rpc_clnt_create(3N)

clnt_create_vers

rpc_clnt_create(3N)

clnt_create_vers_timed

rpc_clnt_create(3N)

clnt_destroy

rpc_clnt_create(3N)

clnt_dg_create

rpc_clnt_create(3N)

clnt_freeres

rpc_clnt_calls(3N)

clnt_geterr

rpc_clnt_calls(3N)

clnt_pcreateerror

rpc_clnt_create(3N)

clnt_perrno

rpc_clnt_calls(3N)

clnt_perror

rpc_clnt_calls(3N)

clnt_raw_create

rpc_clnt_create(3N)

clnt_spcreateerror

rpc_clnt_create(3N)

clnt_sperrno

rpc_clnt_calls(3N)

clnt_sperror

rpc_clnt_calls(3N)

clnt_tli_create

rpc_clnt_create(3N)

clnt_tp_create

rpc_clnt_create(3N)

clnt_tp_create_timed

rpc_clnt_create(3N)

clnt_udpcreate

rpc_soc(3N)

clnt_vc_create

rpc_clnt_create(3N)

clntraw_create

rpc_soc(3N)

clnttcp_create

rpc_soc(3N)

clntudp_bufcreate

rpc_soc(3N)

get_myaddress

rpc_soc(3N)

getnetname

secure_rpc(3N)

host2netname

secure_rpc(3N)

key_decryptsession

secure_rpc(3N)

key_encryptsession

secure_rpc(3N)

key_gendes

secure_rpc(3N)

key_setsecret

secure_rpc(3N)

netname2host

secure_rpc(3N)

netname2user

secure_rpc(3N)

pmap_getmaps

rpc_soc(3N)

pmap_getport

rpc_soc(3N)

pmap_rmtcall

rpc_soc(3N)

pmap_set

rpc_soc(3N)

pmap_unset

rpc_soc(3N)

registerrpc

rpc_soc(3N)

rpc_broadcast

rpc_clnt_calls(3N)

rpc_broadcast_exp

rpc_clnt_calls(3N)

rpc_call

rpc_clnt_calls(3N)

rpc_reg

rpc_svc_calls(3N)

svc_create

rpc_svc_create(3N)

svc_destroy

rpc_svc_create(3N)

svc_dg_create

rpc_svc_create(3N)

svc_dg_enablecache

rpc_svc_calls(3N)

svc_fd_create

rpc_svc_create(3N)

svc_fds

rpc_soc(3N)

svc_freeargs

rpc_svc_reg(3N)

svc_getargs

rpc_svc_reg(3N)

svc_getcaller

rpc_soc(3N)

svc_getreq

rpc_soc(3N)

svc_getreqset

rpc_svc_calls(3N)

svc_getrpccaller

rpc_svc_calls(3N)

svc_raw_create

rpc_svc_create(3N)

svc_reg

rpc_svc_calls(3N)

svc_register

rpc_soc(3N)

svc_run

rpc_svc_reg(3N)

svc_sendreply

rpc_svc_reg(3N)

svc_tli_create

rpc_svc_create(3N)

svc_tp_create

rpc_svc_create(3N)

svc_unreg

rpc_svc_calls(3N)

svc_unregister

rpc_soc(3N)

svc_vc_create

rpc_svc_create(3N)

svcerr_auth

rpc_svc_err(3N)

svcerr_decode

rpc_svc_err(3N)

svcerr_noproc

rpc_svc_err(3N)

svcerr_noprog

rpc_svc_err(3N)

svcerr_progvers

rpc_svc_err(3N)

svcerr_systemerr

rpc_svc_err(3N)

svcerr_weakauth

rpc_svc_err(3N)

svcfd_create

rpc_soc(3N)

svcraw_create

rpc_soc(3N)

svctcp_create

rpc_soc(3N)

svcudp_bufcreate

rpc_soc(3N)

svcudp_create

rpc_soc(3N)

user2netname

secure_rpc(3N)

xdr_accepted_reply

rpc_xdr(3N)

xdr_authsys_parms

rpc_xdr(3N)

xdr_authunix_parms

rpc_soc(3N)

xdr_callhdr

rpc_xdr(3N)

xdr_callmsg

rpc_xdr(3N)

xdr_opaque_auth

rpc_xdr(3N)

xdr_rejected_reply

rpc_xdr(3N)

xdr_replymsg

rpc_xdr(3N)

xprt_register

rpc_svc_calls(3N)

xprt_unregister

rpc_svc_calls(3N)

FILES

/etc/netconfig

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.