Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference > G

getx25(1M)

TO BE OBSOLETED
HP-UX 11i Version 3: February 2007
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

NAME

getx25 — get x25 line

SYNOPSIS

/usr/sbin/getx25 line speed pad-type

DESCRIPTION

The uucp commands, including getx25, are targeted for removal from HP-UX; see the WARNINGS below.

getx25 is functionally very similar to getty (see getty(1M)) but is used only for incoming lines that are connected to an X.25 PAD. It performs special functions such as setting up an initial PAD configuration. It also logs the number of the caller in /var/uucp/.Log/LOGX25. The third parameter is the name of the PAD being used. HP 2334A is the only one supported at this time. A typical invocation would be:

/usr/sbin/getx25 x25.1 2 HP2334A

WARNINGS

Use of uucp commands, including getx25, is discouraged because they are targeted for removal from HP-UX. Use ftp(1) or rcp(1) instead.

AUTHOR

getx25 was developed by HP.

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.