Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
HP-UX Reference > D

dma32_pool_size(5)

Tunable Kernel Parameters
Itanium(R)-based System Only
HP-UX 11i Version 3: February 2007
» 

Technical documentation

» Feedback
Content starts here

 » Table of Contents

 » Index

NAME

dma32_pool_size — the amount of memory to reserve for the 32-bit DMA pool

VALUES

Minimum

0

Maximum

4GB

Default

256MB

Specify an integer value.

DESCRIPTION

This tunable specifies the amount of memory in the first 4GB of the physical address space to be reserved for DMA for 32-bit cards. The memory is set aside at boot time and cannot be used for other purposes. This is required only on some Itanium platforms. On platforms where the 32-bit pool is not needed, this value is ignored.

The value of this tunable should be set based on the number of 32-bit cards in the system and the type of cards.

Related Parameters

None

WARNINGS

All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of HP-UX.

Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation, some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tunable values, consult the documentation for the kernel software being installed. For information about optional kernel software that was factory installed on your system, see HP-UX Release Notes at http://docs.hp.com.

AUTHOR

dma32_pool_size was developed by HP.

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 1983-2007 Hewlett-Packard Development Company, L.P.