parstatus Command

The parstatus command displays information about the nPartitions or hardware within a server complex. If you specify no arguments, parstatus lists information about several of the major components of the server complex.

You can specify an individual entity (cell, I/O chassis, cabinet, or nPartition) to restrict the output to information about that component.

All users can issue this command.

Refer to the parstatus(1) manpage for complete details.

Synopsis

parstatus -s 
parstatus -w 
parstatus [-X] 
parstatus [-A] [-M] -C|-I 
parstatus [-M] -B|-P 
parstatus [-M] -i IOchassis [-i...] 
parstatus [-V|-M] -c cell [-c...] 
parstatus [-V|-M] -b cabinet [-b...] 
parstatus [-V|-M] -p PartitionNumber [-p...]
parstatus -T

Enhanced nPartition Commands Notes.

The -u... -h... set of options may be specified to cause the command to send its management request using WBEM to an nPartition other than the local nPartition (but can also be used as a "loopback access" to the local nPartition).
The -g... -h... options may be specified to cause the command to send its management request using IPMI over LAN to a service processor in another server complex (but can also be used as a "loopback access" to the service processor in the local complex).

The -u and -g options are mutually exclusive.

Options

-s

Indicate (through parstatus exit status) whether the system is an HP server that supports nPartitions. Not supported with the -g... -h... options.

-w

Display the nPartition number for the local nPartition. Not supported with the -g... -h... options.

-X

Display the server complex attributes.

-A

Only display the available resources in the complex.

-V

Increase the amount of information displayed.

For Enhanced nPartition Commands, this option includes interleaved and cell local memory settings when cell (-c cell) or nPartition (-p partition) details are displayed.

-M

Produce output suitable for machine parsing.

-C

Show information for all the cells in the complex.

-I

Show information for all I/O chassis in the complex.

-B

Show information for all cabinets in the complex.

-P

Show information for all nPartitions in the complex.

-c cell

Show information about the specified cell.

-i IOchassis

Show information about the specified I/O chassis.

-b cabinet

Show information about the specified cabinet.

-p partition

Show information about the specified nPartition.

-T

Only display the Hyper-Threading information for supported systems. If the -T option is used with other options, an error occurs except when the -T option is used with its related options. If the -T option is used on a non-supported system, an error occurs.

-u username

Enhanced nPartition Commands only. Specifies the account and authorization to access an nPartition other than the local nPartition.

The -h option is required if this option is used.

username specifies a configured user name on the target nPartition.

-g

Enhanced nPartition Commands only. Allows access to the complex specified by the -h option. The accessed complex is then considered the target complex. Access is through the service processor LAN port.The -h option is required if this option is used.

-h IPaddress|hostname

Enhanced nPartition Commands only. This option is only used in combination with either the -u or -g option. IPaddress|hostname specifies the IP address or hostname of the target nPartition (-u) or service processor (-g).

parstatus Command

Technical documentation

» Table of Contents

Synopsis

Options