Commands Used in This Book
493
Command
Meaning
Chapter
mls rp vlan-id
[vlan-id-number]
Assigns the interface the
proper VLAN number.
Chapter 7
mls rp vtp-domain
[domain-name]
Assigns the interface to the
VTP domain.
Chapter 7
mtrace
Displays the forwarding
path based on group
membership or the RPF.
ping
Used for testing
reachability.
Chapter 10
session
Connects the CLI to a
session on a route
processor module.
Chapter 6
set cgmp enable
Used on Catalyst switches
to enable CGMP.
Chapter 10
set enablepass
Configures the enable
password on a set-based
device.
Chapters 2, 11
set interface sco
Assigns an IP address to
the management interface
of the set-based switch.
Chapter 2
set ip route
Configures a default route
on a set-based switch.
Chapter 6
set mls agingtime
agingtime
Sets the MLS agingtime
value to the specified value.
Chapter 7
set mls agingtime fast
fastagingtime
pkt-threshold
Allows the fast agingtime
and packet threshold to
be set.
Chapter 7
set mls enable
Enables MLS on Catalyst
switches. For most
switches, this is set to on by
default.
Chapter 7
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com