1.
Which of the following is true regarding PAgP? (Choose all that
apply.)
A.
Only statically assigned VLAN ports can be used to form a bundle.
B.
Dynamically assigned VLAN ports can be used to form a bundle.
C.
Dynamically and statically assigned VLAN ports can be used
together to form a bundle.
D.
Ports using different duplex types can be used to form a bundle.
2.
What command is valid for configuring a VTP domain name and set-
ting the VTP mode to server on a 5000 server?
A.
set domain globanet, vtp domain server
B.
set domain globalnet server
C.
set vtp domain Globalnet mode server
D.
set server vtp domain globalnet
3.
You have two routers configured for HSRP. You notice that they
alternate as active router. You enable standby debugging and discover
the following:
SB1:Ethernet0 Hello out 10.1.0.2 Speak pri 160 hel 30 hol
100 ip 10.1.0.200
SB1:Ethernet0 Hello in 10.1.0.1 Active pri 100 hel 3 hol
10 ip 10.1.0.200
What is the cause of this problem?
A.
Bad priority values.
B.
Wrong IP address.
C.
Cannot determine.
D.
SB1 is an illegal value.
E.
Mismatched timers.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com