Hands-On Lab
409
RouterB(config)#^Z
RouterB#
RouterC#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RouterC(config)#ip multicast-routing
RouterC(config)#^Z
RouterC#
RouterD#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RouterD(config)#ip multicast-routing
RouterD(config)#^Z
RouterD#
RouterE#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RouterE(config)#ip multicast-routing
RouterE(config)#^Z
RouterE#
2.
Now, enable PIM sparse-dense mode on all shown connected
interfaces.
RouterA#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RouterA(config)#interface FastEthernet4/0
RouterA(config-if)#ip pim sparse-dense-mode
RouterA(config-if)#interface fastethernet0/0
RouterA(config-if)#ip pim sparse-dense-mode
RouterA(config-if)#^Z
RouterA#
RouterE#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RouterE(config)#interface fastethernet3/0
RouterE(config-if)#ip pim sparse-dense-mode
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com