Page 40

lii

Answers to Assessment Test

37.

A. To see both the virtual IP address and the virtual hardware address
used by HSRP, use the show standby command. See Chapter 8 for more
information on HSRP.

38.

A, C. Connecting to the console port or auxiliary port is out-of-band
management because you are not accessing the equipment from within
the network. See Chapter 11 for more information on in-band and
out-of-band management.

39.

D. A is a Class B address. 223.0.0.1 does not have the proper mask.
C is within the valid range, but it is not all-inclusive. See Chapter 9 for
more information.

40.

D. Enterprise services are defined as services that are provided to all
users on the internetwork. See Chapter 1 for more information.

41.

D. The 1900 defaults to FragmentFree, but it can be changed to
store-and-forward. For more information on LAN switch types, see
Chapter 4.

42.

D. Internet Control Message Protocol (ICMP) is used by ICMP
Router Discovery Protocol (IRDP) to update clients dynamically
about default gateways. See Chapter 8 for more information
regarding IRDP.

43.

C. A cross-over cable is used to connect switches to switches and
hubs to hubs. See Chapter 2 for more information on the Catalyst
5000 configuration.

44.

A, D. Cut-through and FragmentFree always read only a fixed
amount of a frame. For more information on LAN switch types, see
Chapter 4.

45.

C, D. The Route Switch Feature Card (RSFC) is a daughter card used
on a supervisor II and III card to provide a fully functioning router
IOS. See Chapter 6 for more information on internal and external
route processors.

www.sybex.com