Page 38

Answers to Assessment Test

18.

D. The

command

set enablepass

will set the password on a 5000

series switch. See Chapter 2 for more information on configuring the
5000 series of switches.

19.

C. An external route processor configured with subinterfaces does
not need a shutdown performed on each subinterface, only the main
interface. However, an internal route processor must have a no
shutdown

command performed under every VLAN interface. See

Chapter 6 for more information on internal and external route
processors.

20.

D. CGMP is not a version of IGMP. It was developed by Cisco Sys-
tems, but it was never an additional version of IGMP. See Chapter 9
for more information.

21.

C. The

command

set route default

and the command set route

0.0.0.0

are the same command and can be used to set a default gate-

way on a 5000 series switch. See Chapter 6 for more information on
configuring a 5000 series switch.

22.

B, C. The distribution layer security can include access lists. Distrib-
ute lists are access lists that you can use to filter routing tables. See
Chapter 11 for more information on access policies.

23.

C. To communicate to another VLAN, packets must cross a layer 3
device. See Chapter 1 for more information on local and remote
VLAN services.

24.

C. You cannot turn off Pruneeligible for VLAN 1, which makes C the
only correct answer. For more information, see Chapter 3.

25.

C, D. The Multilayer Switch Feature Card (MSFC) is a Route Pro-
cessor (RP) and does not perform the rewrites for MLS packets. The
same goes for the Route Switch Module (RSM). The NetFlow Feature
Card (NFFC) and the Policy Feature Card (PFC) are responsible for
the MLS packet rewrite. See Chapter 7 for more information.

26.

A. Use

the

access-class number in/out

command to set an access

list on a VTY line. See Chapter 11 for more information on access lists.

www.sybex.com