Summary
291
Key Terms
Before you take the exam, be sure you're familiar with the following terms:
Commands Used in This Chapter
The following table provides a summary of the commands used in this chap-
ter. There were no access layer switches used in this chapter, so the table is
based on a distribution switch.
candidate packets
Multilayer Switching Switching
Engine (MLS-SE)
enable packets
NetFlow Feature Card (NFFC)
flow
Policy Feature Card (PFC)
Multilayer Switch Feature Card
(MSFC)
Route Switch Module (RSM)
Multi-Layer Switching (MLS)
router on a stick
Multilayer Switching Protocol
(MLSP)
XTAG
Multilayer Switching Route
Processor (MLS-RP)
Command
Meaning
show mls
Shows MLS information on a
switch.
mls rp ip
Enables MLS on an external
router, both global and interface
specific.
set mls enable
Enables MLS on Catalyst
switches. For most switches, this is
set to on by default.
show vtp domain
Provides VTP domain information
on the switch.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com