MLS-RP Configuration
281
Verifying the MLS Configuration
Once all of the pieces have been configured, you may issue the show mls rp
command to view the MLS status and information on the router. There are
two options in correlation with the main command. All three commands are
shown here:
show mls rp
Provides global MLS information
show mls rp interface
Provides interface-specific MLS information
show mls rp vtp-domain
Provides MLS information for the VTP
domain
Here is an example of the global command:
RouterA#show mls rp
multilayer switching is globally enabled
mls id is 0010.a6a9.3400
mls ip address 172.16.21.4
mls flow mask is destination-ip
number of domains configured for mls 1
vlan domain name: test
current flow mask: destination-ip
current sequence number: 3041454903
current/maximum retry count: 0/10
current domain state: no-change
current/next global purge: false/false
current/next purge count: 0/0
domain uptime: 00:34:35
keepalive timer expires in 4 seconds
retry timer not running
change timer not running
fcp subblock count = 1
1 management interface(s) currently defined:
vlan 10 on FastEthernet4/0
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com