xliv
Assessment Test
40.
Which of the following defines enterprise services?
A.
Users do not cross layer 3 devices, and the network services are in
the same broadcast domain as the users. This type of traffic never
crosses the backbone.
B.
No layer 3 switches or devices are used in this network.
C.
The users would have to cross a layer 3 device to communicate
with the network services, but they might not have to cross the
backbone.
D.
Layer 3 switches or routers are required in this scenario because
the services must be close to the core and would probably be based
in their own subnet.
41.
What is the default LAN switch type for the 1900 switch?
A.
FastForward
B.
Cut-through
C.
LANSwitch type 1
D.
FragmentFree
E.
Store-and-forward
42.
Which is true regarding IRDP?
A.
It can be used only on Ethernet LANs.
B.
It is used to update ARP caches on workstations.
C.
IRDP works only with Unix devices.
D.
It uses ICMP to send update messages to clients regarding the
default gateway address.
43.
What type of cable must you use to connect between two switch
uplink ports?
A.
Straight
B.
Rolled
C.
Cross-over
D.
Fiber
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com