256
Chapter 6
Inter-VLAN Routing
9.
Which of the following is true regarding the configuration between the
different internal route processors?
A.
The 6000 series internal processors use the set commands.
B.
The 5000 series internal processors use the same Cisco IOS com-
mands a 1900 switch uses.
C.
The 8500 series of switches do not support internal route
processors.
D.
There is no difference in the configuration between the different
internal route processors.
10.
Which two commands can be used to set a default route on a 5000
series switch to 172.16.1.1?
A.
route add 0.0.0.0 0.0.0.0 172.16.1.1
B.
set route default 0.0.0.0 172.16.1.1
C.
set route default 172.16.1.1
D.
set route 0.0.0.0 172.16.1.1
11.
Which of the following is used to configure VLAN 1 on an internal
route processor with an IP address of 208.211.78.200/28?
A.
set vlan1 ip address 208.21.78.200 255.255.255.240
B.
config t, vlan1 ip address 208.21.78.200
255.255.255.240
C.
int vlan 1, ip address 208.211.78.200 255.255.255.240
D.
set int vlan1, ip address 208.211.78.200
255.255.255.224
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com