Hands-On Lab
251
4.
Before this will work, you need to set the port on the 5000 to trunk
mode. Go to the 5000 switch and configure the port.
Cat5000> (enable) set trunk 2/3 on
Port(s) 2/3 trunk mode set to on.
Cat5000> (enable)
5.
Test the configuration by pinging to all devices from the router.
2621A#ping 172.16.3.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.3.2, timeout
is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/
max = 1/1/4 ms
2621A#ping 172.16.1.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.3, timeout
is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/
max = 4/5/8 ms
2621A#ping 172.16.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.2.2, timeout
is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/
max = 4/5/8 ms
2621A#ping 172.16.1.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.2.2, timeout
is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/
max = 4/5/8 ms
2621A#ping 172.16.1.4
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.2.2, timeout
is 2 seconds:
.!!!!
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com