Hands-On Lab
247
12.
Verify that the EtherChannel is working by typing show channel.
Cat5000> (enable) show port channel
Port Status Channel Channel Neighbor Neighbor
mode status device port
----- ---------- --------- ----------- -------------- -----
1/1 connected on channel cisco 1900 1900B A
1/2 connected on channel cisco 1900 1900B B
----- ---------- --------- ----------- --------------- -----
Cat5000> (enable)
13.
At this point, the three switches should be up and working and you
should be able to ping all devices in the 172.16.1.0 network.
Cat5000> (enable) ping 172.16.1.3
172.16.1.3 is alive
Cat5000> (enable) ping 172.16.1.4
172.16.1.4 is alive
Configuring VLANs
Because the 5000 series switch is a VTP server and the two 1900 switches are
VTP clients, you can configure VLANs on just the 5000 series switch and the
5000 switch will automatically update the VTP NVRAM on the 1900
switches.
1.
On the 5000 series switch console, create two new VLANs.
VLAN 2: Sales
VLAN 3: Admin
Cat5000> (enable) set vlan 2 name Sales
Vlan 2 configuration successful
Cat5000> (enable) set vlan 3 name Admin
Vlan 3 configuration successful
Cat5000>(enable)
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com