Hands-On Lab
137
VLAN 3 will be the Mrkt VLAN and will use IP network
172.16.30.0. Ports 3 and 4 on card 2 will be used.
VLAN 4 will be the Accnt VLAN and will use IP network
172.16.40.0. Ports 5 and 6 on card 2 will be used.
Here is the configuration:
Set vlan 2 name Sales
Set vlan 3 name Mrkt
Set vlan 4 name Accnt
Set vlan 2 2/1-2
Set vlan 3 2/3-4
Set vlan 4 2/5-6
3.
Type in the commands to verify the VLAN configuration and VTP
configuration:
show vtp
show vlan
4.
Because you want VLAN information to be propagated to the 1900
switch, a trunked link needs to be configured between both the
switches. Set the trunked link on port 1/1 and port 1/2 of the 5000
switch. These are your connections to the access layer switch (1900A).
Remember that the 1900 switch can use only ISL trunking, so the
5000 needs to be configured with ISL trunking:
set trunk 1/1 on isl
set trunk 1/2 on isl
5.
Type the command to view the trunked link:
show trunk 1/1
show trunk 1/2
6.
Connect to the 1900 switch and set the VTP domain name:
config t
vtp domain Routersim
7.
Set the VTP mode to client:
vtp mode client
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com