130
Chapter 3
VLANs
pruning VTP pruning
trap VTP trap
<cr>
1900EN(config)#vtp client
Verifying the VTP Configuration
You can verify the VTP domain information by using the commands show
vtp domain
and show vtp statistics. However, you cannot run a show vtp
domain
command on a 1900.
The show VTP domain command will show you the domain name, mode,
and pruning information:
Console> (enable) sh vtp domain
Domain Name Domain Index VTP Version Local Mode Password
--------------------- ------------ ----------- -----------
Globalnet 1 2 server
Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
5 1023 1 disabled
Last Updater V2 Mode Pruning PruneEligible on Vlans
--------------- -------- -------- -------------------------
172.16.10.14 disabled disabled 2-1000
Console> (enable)
5000 Series
The show VTP statistics command shows a summary of VTP advertise-
ment messages sent and received. It also will show configuration errors if
detected:
Console> (enable) sh vtp stat
VTP statistics:
summary advts received 0
subset advts received 0
request advts received 0
summary advts transmitted 5
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com