VLAN Trunk Protocol (VTP)
129
pruning VTP pruning
server VTP server
transparent VTP transparent
trap VTP trap
<cr>
1900EN(config)#vtp domain Globalnet
1900EN(config)#
Configure the VTP Mode
Create your first switch as a server, and then create the connected switches
as clients, or whatever you decided to configure them as. You don't have to
do this as a separate command as we did; you can configure the VTP infor-
mation in one line, including passwords, modes, and versions:
Console> (enable) set vtp domain
Usage: set vtp [domain <name>] [mode <mode>]
[passwd <passwd>]pruning <enable|disable>]
[v2 <enable|disable>
(mode = client|server|transparent
Use passwd '0' to clear vtp password)
Usage: set vtp pruneeligible <vlans>
(vlans = 2..1000
An example of vlans is 2-10,1000)
Console> (enable) set vtp domain Globalnet mode server
VTP domain Globalnet modified
On the 1900, use the vtp client command:
1900EN(config)#vtp ?
client VTP client
domain Set VTP domain name
password Set VTP password
pruning VTP pruning
server VTP server
transparent VTP transparent
trap VTP trap
1900EN(config)#vtp client ?
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com