128
Chapter 3
VLANs
The 1900 switch only uses VTP version 1. There are no configuration
options for VTP versions:
1900EN(config)#vtp ?
client VTP client
domain Set VTP domain name
password Set VTP password
pruning VTP pruning
server VTP server
transparent VTP transparent
trap VTP trap
Configure the Domain
After you decide which version to run, set the VTP domain name and pass-
word on the first switch. The VTP name can be up to 32 characters long. On
the 5000, you can set the VTP domain password (the password is a mini-
mum of 8 characters with a maximum of 64):
Console> (enable) set vtp domain ?
Usage: set vtp [domain <name>] [mode <mode>]
[passwd <passwd>]
[pruning <enable|disable>]
[v2 <enable|disable>
(mode = client|server|transparent
Use passwd '0' to clear vtp password)
Usage: set vtp pruneeligible <vlans>
(vlans = 2..1000
An example of vlans is 2-10,1000)
Console> (enable) set vtp domain Globalnet
VTP domain Globalnet modified
Console> (enable)
On the 1900, you don't have a VTP password option:
1900EN(config)#vtp domain ?
WORD Name of the VTP management domain
1900EN(config)#vtp domain Globalnet ?
client VTP client
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com