Answers to Review Questions
97
Answers to Review Questions
1.
B. Full-duplex Ethernet uses a point-to-point connection between the
transmitter of the transmitting station and the receiver of the receiving
station.
2.
D. You cannot telnet from a 1900 switch console. You can telnet into
the switch. You can ping to a 1900 switch and from a 1900 switch
console.
3.
C. The privileged command duplex full sets the duplex of a 1900
interface.
4.
C. You can use the command duplex full-flow-control on a
1900 switch interface so flow control will be used on that particular
interface.
5.
B. The 5000 series of switches uses the set commands. To set a
parameter on a certain interface, use the set port command. To
enable a port that has been disabled, use the command set port
enable slot/port
.
6.
D. The 1900 switch command-line interface uses the show
interface slot/port
command, the same as any router that has
modular interface cards.
7.
B. The 5000 uses the set port command to change interface param-
eters. The set port duplex slot/port command is used to set the
duplex of a particular port.
8.
A. Unlike the 1900, you do not need to add an underscore when you
add a description on an interface with the 5000 series switch. The set
port
command is used to change port parameters, and set port
name slot/port description
is used to identify the port to an
administrator. A is the best answer.
9.
D. Use the command set prompt to set the hostname on a 5000
series switch.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com