Review Questions
93
12.
What is the distance you can run a MMF with 62.5-micron fiber-optic
core with a 125-micron outer cladding (62.5/125) using FastEthernet?
A.
25 meters
B.
400 meters
C.
260 meters
D.
3 km
13.
What is the distance you can run, and stay in spec, from a patch panel
to a switch using 10BaseT?
A.
5 meters
B.
25 meters
C.
90 meters
D.
100 meters
E.
330 feet
14.
If you wanted to set port 3 on card 2 on a 5000 switch to run only
100Mbps, what command would you use?
A.
set port speed 100 2/3
B.
port speed 100 3/2
C.
set port duplex 2/3 100
D.
set port speed 2/3 100
15.
Which of the following is true regarding a port status light on a
switch?
A.
It is used to see if a loop has occurred on the network.
B.
It is used to identify RTS signaling.
C.
When a device is connected to a port, the port status LED light
comes on and stays on.
D.
When a device is connected to a port, the port status LED light
comes on, then goes off.
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com