Practice Exam
407
21.
The following output is an example of using which command?
BGP neighbor is 172.16.11.254, remote AS 100, internal
link
Index 1, Offset 0, Mask 0x2
Route-Reflector Client
BGP version 4, remote router ID 10.16.1.1
BGP state = Established, table version = 1, up for
12:10:16
Last read 00:00:06, hold time is 180,
keepalive interval is 60 seconds
Minimum time between advertisement runs is 5 seconds
Received 143 messages, 0 notifications, 0 in queue
Sent 52 messages, 0 notifications, 0 in queue
Prefix advertised , suppressed 0, withdrawn 0
Connections established 2; dropped 1
Last reset 12:10:16, due to User reset
53 accepted prefixes consume 32 bytes
0 history paths consume 0 bytes
A.
show ip bgp all
B.
show cdp bgp neighbors
C.
show running-config
D.
show ip bgp neighbors
22.
When an AS must traverse another AS to get to its destination, the tra-
versed AS is called which of the following?
A.
Transfer AS
B.
Forwarding AS
C.
Transit AS
D.
Transmitting AS
Copyright ©2001 SYBEX , Inc., Alameda, CA
www.sybex.com