Page 39

Answers to Assessment Test

43.

B. After a traffic pattern has been identified by a route map's match
clause, the set clause sets route parameters such as next-hop address
or default route. For more information, see Chapter 10.

44.

A. The

remote-as

syntax identifies the peer router that the local

router will enable a session with. The IP address identifies the interface
attached to the peer router. If the ASN is the same number as the inter-
nal ASN, it identifies an internal AS; if it is different, it identifies an
external AS. See Chapter 8 for more information.

45.

A. The Weight attribute is a Cisco proprietary BGP attribute used as
a metric to find the best routes through the networks. See Chapter 8
for more information.

46.

B, C, D. When you use multi-homing with only static routes, it is
considered a Basic classification. When you use static routes and BGP
learned routes, it is considered a Medium classification. When you use
only BGP learned routes, it is considered a Full classification. See
Chapter 9 for more information.

47.

C. The Distribution layer connects Access layer devices together and
provides users with network service connections. See Chapter 1 for
more information on the Cisco three-layer model.

48.

C. Routers not participating as a route reflector client are called non-
client routers. Non-client refers to any iBGP peer that is not partici-
pating in the route reflector cluster as a client. See Chapter 9 for more
information.

49.

C. Sometimes referred to as the Dijkstra Algorithm, OSPF uses the
Shortest Path First Algorithm to generate its composite metric. For
more information, see Chapter 10.

50.

E, F. Although EIGRP is really a hybrid routing protocol, it is con-
sidered an advanced distance-vector protocol, not link-state. See
Chapter 2 for more information on link-state protocols.

www.sybex.com