Hands-on Lab
233
RouterB(config)#router eigrp 100
RouterB(config-router)#network 172.16.0.0
RouterB(config-router)#exit
RouterB#
3.
Implement EIGRP on RouterC, as shown here:
RouterC#conf t
Enter configuration commands, one per line. End with CNTL/Z.
RouterC(config)#router eigrp 100
RouterC(config-router)#network 172.16.0.0
RouterC(config-router)#network 192.168.1.0
RouterC(config-router)#^Z
RouterC#
4.
Display the topology table for RouterB, as shown here:
RouterB#show ip eigrp topology
Codes: P - Passive, A - Active, U - Update, Q - Query,
R - Reply, r - Reply status
P 172.0.0.0/8, 1 successors, FD is 307200
via 172.16.20.5 (307200/281600), Ethernet0/0
P 192.168.1.0/24, 1 successors, FD is 307200
via 172.16.40.6 (307200/281600), Ethernet0/1
P 172.16.40.4/30, 1 successors, FD is 281600
via Connected, Ethernet0/1
P 172.16.20.4/30, 1 successors, FD is 281600
via Connected, Ethernet0/0
RouterB#
Copyright ©2001 SYBEX , Inc., Alameda, CA
www.sybex.com