102
Chapter 3
IP Addressing
We can now take our VLSM address ranges and apply them to our net-
work diagram, as shown in the following graphic.
Hands-on Lab
F
or this lab, you will need the following:
Two Cisco routers running IOS 11.2 or later, each with at least one
serial interface
A serial crossover cable (or connect a DTE cable to a DCE cable to
make your own crossover cable)
A terminal (or a PC running terminal emulation software) with the
appropriate console connection hardware for the routers
Point-to-Point Serial Connection
(172.16.0.5--172.16.0.6)
Server Farm Switch
(172.16.0.65--172.16.0.126)
Public Access Computer Lab Switch
(172.16.2.1--172.16.3.254)
Ethernet User Segment
(172.16.1.1--172.16.1.254)
Copyright ©2001 SYBEX , Inc., Alameda, CA
www.sybex.com