418 Chapter A: Answers to the "Do I Know This Already?" Quizzes and Q&A Sections
8
Define the acronyms SOHO and RO.
They stand for small office/home office and remote office. The difference between them
is slight: the 700 is positioned for a SOHO and not generally positioned for a RO. This
should be remembered when selecting equipment during the test.
9
Can an ISP support DDR and BoD with a 700 series router? If not, why?
Both DDR routing and BoD are supported on the device, not the ISP. DDR is controlled
by the 700, and BoD is supported with the Multilink PPP option, if negotiated during the
LCP setup. This question is tricky.
10
What command would you use to declare the use of CHAP authentication when a 700
series router calls a remote site?
set ppp auth out chap
11
What does the command set system 700MLP do?
It changes the system name to 700MLP.
12
What is the mechanism that points the 700 series router to the ISP?
The static route that is in the profile that dials the ISP is the mechanism that enables the
700 series router to route packets to the ISP. In general, the route to the ISP would be the
default, or all 0's, route.
13
Which of the following protocols are supported by the 700 series router: PAP, CHAP,
MPPP, IGRP, ISP, and PAT?
PAP, CHAP, MPPP, and PAT are supported.
14
What routing protocols can be configured on the 700 series router?
RIP-1 and RIP-2 can be configured on the 700 series router.
15
What command is used to display the 700 configuration?
upload
16
What is the command required for a soft boot on a 700 series router?
reset
17
What command would you use to configure the 700 series router as a DHCP relay agent?
You would use set dhcp relay ip-address, where ip-address is the IP address of the DHCP
server.
18
What does the following command do: set dhcp address 10.1.1.5 12?
The command sets a DHCP address range between 10.1.1.5 and 10.1.1.16.