278 Chapter 9: Frame Relay Connection Controlling Traffic Flow
Table 9-7 provides a review of the show and debug commands mentioned in the chapter for
Frame Relay verification.
frame-relay mincir [in | out] bits
Defines the MinCIR for a map class.
class name
Associates a map class with a specific PVC or
subinterface.
frame-relay class name
Associates a map class with a major interface.
Table 9-7
Useful Frame Relay show and debug Commands
Command
Function
show frame-relay pvc
Displays status information for PVCs, including DLCI,
LMI counts, FECN/BECN counts, and PVC state
(ACTIVE, INACTIVE or DELETED).
show frame-relay lmi
Displays LMI traffic statistics for both inbound LMI
packets and outbound LMI packets.
show frame-relay map
Displays the protocol to DLCI mappings for PVCs as well
as whether the mapping is static or dynamic.
show traffic-shape
Displays general traffic shaping information and statistics.
show traffic-shape statistics
Displays only traffic shaping statistics.
debug frame-relay lmi
Enables the real-time logging and monitoring of LMI
packets sent and received. It also monitors the state of the
Frame Relay connection (DTE up or DTE down). This is
arguably the most valuable troubleshooting command for
new Frame Relay connections.
Table 9-6
Frame Relay Traffic Shaping Commands (Continued)