246 Chapter 8: Establishing an X.25 Connection
1
Is this implementation using PVCs or SVCs for X.25 connectivity? How can you tell?
2
Will the Dallas and San Jose routers experience connectivity problems with the
configuration provided by Example 8-6 and 8-7? If so, why?
3
Make changes to the configuration in Example 8-6 and 8-7 that correct issues with the
existing configuration only. Do not add additional lines to the configuration.
Scenario 8-2: X.25 Options
Refer to Figure 8-8. Use the settings specified to fulfill the requirements of the following:
1
Expand the configurations to include the packet size parameters listed in the figure.
2
Expand the configuration to include the windows size parameters listed in the figure.
3
Expand the configuration to include the appropriate modulo. Note that the modulo is not
provided in the figure.
Example 8-7
San Jose Configuration for Scenario 8-1
interface ethernet 0
ip address 192.168.3.1 255.255.255.0
interface serial 0
encapuslation x25
ip address 192.168.2.2 255.255.255.0
x25 address 3104085553434
x25 map ip 192.168.2.1 3102145551212 broadcast
x25 ltc 90
x25 htc 100