693
Command
Description
Chapter(s)
show vtp domain
Provides status information for the VTP
domain configured on the switch. Note
that VTP updates are sent over VLAN 1
when troubleshooting.
11
terminal monitor
Enables the router to echo console
message to the active TTY port. This
facilitates the debug tool.
4
terminal no monitor
Disables the echo.
4
test appletalk
Enables the testing mode for AppleTalk.
10
trace
route
Performs a hop-by-hop ICMP trace. This
command has two levels, User and
Privileged.
4, 6
tracert
The trace command used in the Windows
operating system. Provides a step-by-step
ICMP trace from source to destination.
5
un all
Turns off all possible debugging.
4
write core
Initiates a core dump to the specified
host.
4
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com