685
Command
Description
Chapter(s)
debug ppp authentication
Gives details regarding the PPP/CHAP
authentication connection sequence.
8
debug ppp negotiation
Provides real-time information about the
establishment of a session.
8
debug ppp packet
Reports real-time PPP packet flow,
including the type of packet and the
specific B channel used.
8
debug serial interface
Displays signaling information for the
interface.
7
debug serial packet
Displays information regarding serial
packets.
7
debug snmp packets
Provides detail for snmp packets destined
for the router.
3
debug span
Debugs spanning tree.
11
debug vlan packet
Debugs VLAN packets.
11
debug x25 events
Displays X.25 events in detail.
7
exception dump
Configures the router to perform a core
dump via TFTP or FTP if and when the
router crashes.
4
ipconfig /all
(Windows 98 command) Provides
interface configuration for the host.
6
nbp confirm appletalk-
address [:skt] object:
type@zone
Verifies the AppleTalk address against its
name and zone information.
10
nbp lookup
object:type@zone
Provides the AppleTalk address of a
known NBP service.
10
nbp parameters
Permits control over retransmissions,
replies, and intervals used by the other
NBP
test
commands.
10
NBP Poll
Searches for all devices in all zones.
10
ping
Initiates an ICMP echo request. There are
two levels, User and Privileged. The IP
protocol is used.
4, 5, 6, 8
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com