668
Appendix A
Practice Exam
40.
Which command produced the following output?
Hssi3/0 is up, line protocol is up
IPX address is F100.0010.0d28.6760 [up] line-up, RIPPQ:
0, SAPPQ: 0
Delay of this IPX network, in ticks is 1 throughput 0
link delay 0
IPXWAN processing not enabled on this interface.
IPX SAP update interval is 1 minute(s)
IPX type 20 propagation packet forwarding is disabled
Incoming access list is not set
Outgoing access list is not set
IPX helper access list is not set
SAP GNS processing enabled, delay 0 ms, output filter
list is not set
SAP Input filter list is not set
SAP Output filter list is not set
SAP Router filter list is not set
Input filter list is not set
Output filter list is not set
Router filter list is not set
Netbios Input host access list is not set
Netbios Input bytes access list is not set
Netbios Output host access list is not set
Netbios Output bytes access list is not set
Updates each 60 seconds, aging multiples RIP: 3 SAP: 3
SAP interpacket delay is 55 ms, maximum size is 480
bytes
RIP interpacket delay is 55 ms, maximum size is 432
bytes
Watchdog spoofing is disabled, SPX spoofing is
disabled, idle time 60
IPX accounting is disabled
IPX fast switching is configured (enabled)
RIP packets received 3228022, RIP packets sent 121313
SAP packets received 3507665, SAP packets sent 3003606
A.
show interface hssi3/0
B.
debug ipx interface hssi3/0
C.
show ipx interface hssi3/0
D.
show ipx protocol interface hssi3/0
Copyright ©2000 SYBEX , Inc., Alameda, CA
www.sybex.com